Data Sheet
Table Of Contents
- Document information
- Contents
- 1 Functional description
- 2 Pin definition
- 3 Electrical specifications
- 4 Firmware
- 5 Mechanical specifications
- 6 RF design notes
- 7 BMD-380 evaluation development kit
- 8 Qualification and approvals
- 9 Environmental
- 10 Product handling
- 11 Ordering information
- 12 Life support and other high-risk use warning
- Related documents
- Revision history
- Contact
BMD-380 - Data sheet
UBX-19039467 - R06 Document information Page 2 of 36
Document information
Title
BMD-380
Subtitle
Stand-alone Bluetooth 5 low energy and IEEE 802.15.4 module
Document type
Data sheet
Document number
UBX-19039467
Revision and date
R06
20-May-2020
Disclosure restriction
Product status
Corresponding content status
Functional sample
Draft
For functional testing. Revised and supplementary data will be published later.
In development /
Prototype
Objective specification
Target values. Revised and supplementary data will be published later.
Engineering sample
Advance information
Data based on early testing. Revised and supplementary data will be published later.
Initial production
Early production information
Data from product verification. Revised and supplementary data may be published later.
Mass production /
End of life
Production information
Document contains the final product specification.
This document applies to the following products:
Product name
Type number
Firmware version
PCN reference
Product status
BMD-380
BMD-380-A-R-00
N/A
N/A
Engineering sample
BMD-380
BMD-380-A-R-10
N/A
N/A
Engineering sample
u-blox or third parties may hold intellectual property rights in the products, names, logos and designs included in this
document. Copying, reproduction, modification or disclosure to third parties of this document or any part thereof is only
permitted with the express written permission of u-blox.
The information contained herein is provided “as is” and u-blox assumes no liability for its use. No warranty, either express or
implied, is given, including but not limited to, with respect to the accuracy, correctness, reliability and fitness for a particular
purpose of the information. This document may be revised by u-blox at any time without notice. For the most recent
documents, visit www.u-blox.com.
Copyright © u-blox AG.