Integration Manual

ANNA-B4 series - System integration manual
UBX-21000517 - R03 Contents Page 32 of 76
C1-Public
An example of what a custom board support file could look like for the EVK-ANNA-B402 can be found
in the u-blox short range GitHub repository [17].
The custom board can then be selected by adding a define of the symbol BOARD_CUSTOM to your build.
Follow the procedure outlined below to add the BOARD_CUSTOM define statement in SEGGER Embedded
Studio:
1. Right-click the Project in “Project Explorer”.
2. Select Options…
Figure 11: Selecting project options for modifying the Define statement in SEGGER Embedded Studio
3. Select the Common configuration.
4. Select the Code / Preprocessor.
5. Select the Preprocessor Definitions.
Figure 12: Project options for modifying the Define statement in SEGGER Embedded Studio