User's Manual

SARA-R4 series - System Integration Manual
UBX-16029218 - R03 Approvals
Page 79 of 94
4.3 Innovation, Science and Economic Development Canada notice
ISED Canada (formerly known as IC - Industry Canada) Certification Numbers:
 u-blox SARA-R410M cellular modules: 8595A-2AGQN4NNN
4.3.1 Declaration of Conformity
This device complies with Part 15 of the FCC rules and with the ISED Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
 this device may not cause harmful interference
 this device must accept any interference received, including interference that may cause undesired operation
Radiofrequency radiation exposure Information: this equipment complies with radiation exposure
limits prescribed for an uncontrolled environment for fixed and mobile use conditions. This
equipment should be installed and operated with a minimum distance of 20 cm between the
radiator and the body of the user or nearby persons. This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter except as authorized in the
certification of the product.
The gain of the system antenna(s) used for the SARA-R4 series modules (i.e. the combined
transmission line, connector, cable losses and radiating element gain) must not exceed the value
stated in the IC Grant for mobile and fixed or mobile operating configurations:
o SARA-R410M modules:
 3.67 dBi in 700 MHz, i.e. LTE FDD-12 band
 4.10 dBi in 850 MHz, i.e. LTE FDD-5 band
 6.74 dBi in 1700 MHz, i.e. LTE FDD-4 band
 7.12 dBi in 1900 MHz, i.e. LTE FDD-2 band
4.3.2 Modifications
The ISED Canada requires the user to be notified that any changes or modifications made to this device that are
not expressly approved by u-blox could void the user's authority to operate the equipment.
Manufacturers of mobile or fixed devices incorporating the SARA-R4 series modules are
authorized to use the ISED Canada Certificates of the SARA-R4 series modules for their own final
products according to the conditions referenced in the certificates.
The ISED Canada Label shall in the above case be visible from the outside, or the host device shall
bear a second label stating:
"Contains IC: 8595A-2AGQN4NNN" resp.
Innovation, Science and Economic Development Canada (ISED) Notices
This Class B digital apparatus complies with Canadian CAN ICES-3(B) / NMB-3(B).
Operation is subject to the following two conditions:
o this device may not cause interference
o this device must accept any interference, including interference that may cause undesired
operation of the device