Integration Manual
SARA-R4/N4 series - System Integration Manual
UBX-16029218 - R13 Approvals Page 99 of 119
4.2 US Federal Communications Commission notice
United States Federal Communications Commission (FCC) IDs:
• u-blox SARA-R404M cellular modules: XPY2AGQN1NNN
• u-blox SARA-R410M and SARA-N410 cellular modules: XPY2AGQN4NNN
• u-blox SARA-R412M cellular modules: XPYUBX18ZO01
4.2.1 Safety warnings review the structure
• Equipment for building-in. Requirements for fire enclosure must be evaluated in the end product
• The clearance and creepage current distances required by the end product must be withheld when the module is
installed
• The cooling of the end product shall not negatively be influenced by the installation of the module
• Excessive sound pressure from earphones and headphones can cause hearing loss
• No natural rubbers, hygroscopic materials, or materials containing asbestos are employed
4.2.2 Declaration of Conformity
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
• this device may not cause harmful interference
• this device must accept any interference received, including interference that may cause undesired operation
⚠
⚠⚠
⚠
Radiofrequency radiation exposure information: this equipment complies with the radiation exposure limits
prescribed for an uncontrolled environment for fixed and mobile use conditions. This equipment should be installed
and operated with a minimum distance of 20 cm between the radiator and the body of the user or nearby persons.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter except as
authorized in the certification of the product.
⚠
⚠⚠
⚠
The gain of the system antenna(s) used for the SARA-R4/N4 series modules (i.e. the combined transmission line,
connector, cable losses and radiating element gain) must not exceed the value specified in the FCC Grant for mobile
and fixed or mobile operating configurations:
• SARA-R404M modules:
o 13 dBi in 750 MHz, i.e. LTE FDD-13 band
• SARA-R410M-01B modules:
o 3.67 dBi in 700 MHz, i.e. LTE FDD-12 band
o 4.10 dBi in 850 MHz, i.e. LTE FDD-5 band
o 6.74 dBi in 1700 MHz, i.e. LTE FDD-4 band
o 7.12 dBi in 1900 MHz, i.e. LTE FDD-2 band
• SARA-R410M-02B, SARA-R410M-52B and SARA-N410-02B modules:
o 3.66 dBi in 700 MHz, i.e. LTE FDD-12 band
o 3.94 dBi in 750 MHz, i.e. LTE FDD-13 band
o 4.41 dBi in 850 MHz, i.e. LTE FDD-5 band
o 6.75 dBi in 1700 MHz, i.e. LTE FDD-4 band
o 7.00 dBi in 1900 MHz, i.e. LTE FDD-2 band
o 9.40 dBi in 1900 MHz, i.e. LTE FDD-25 band
• SARA-R412M-02B modules:
o 8.69 dBi in 700 MHz, i.e. LTE FDD-12 band
o 9.15 dBi in 750 MHz, i.e. LTE FDD-13 band
o 9.41 dBi in 850 MHz, i.e. GSM 850 / LTE FDD-5 band
o 12.01 dBi in 1700 MHz, i.e. LTE FDD-4 band
o 12.01 dBi in 1900 MHz, i.e. GSM 1900 / LTE FDD-2 band