Integration Manual

SARA-R4/N4 series - System Integration Manual
UBX-16029218 - R13 Design-in Page 88 of 119
2.14.3 Antenna checklist
 Antenna termination should provide 50 Ω characteristic impedance with V.S.W.R at least less than 3:1
(recommended 2:1) on operating bands in deployment geographical area.
 Follow the recommendations of the antenna producer for correct antenna installation and deployment (PCB
layout and matching circuitry).
 Ensure compliance with any regulatory agency RF radiation requirement, as reported in section 4.2.2 for United
States and in section 4.3.1 for Canada.
 Ensure high isolation between the cellular antenna and any other antennas or transmitters present on the end
device.