Integration Manual

SARA-R4/N4 series - System Integration Manual
UBX-16029218 - R13 Design-in Page 51 of 119
2.2.1.8 Guidelines for particular VCC supply circuit design for SARA-R412M
SARA-R412M modules have separate supply inputs over the VCC pins (see Figure 3):
• VCC pins #52 and #53: supply input for the internal RF Power Amplifier, demanding most of the total current drawn
of the module when RF transmission is enabled during a call
• VCC pin #51: supply input for the internal Power Management Unit, Base-Band and Transceiver parts, demanding
minor current
Generally, all the VCC pins are intended to be connected to the same external power supply circuit, but separate supply
sources can be implemented for specific (e.g. battery-powered) applications. The voltage at the VCC pins #52 and #53
can drop to a value lower than the one at the VCC pin #51, keeping the module still switched-on and functional. Figure
25 illustrates a possible application circuit.
C1 C4
GND
C3C2 C5
SARA-R412M
52
VCC
53
VCC
51
VCC
+
Li-Ion/Li-Pol
Bat t ery
C6
SWVIN
SHDNn
GND
FB
C7
R1
R2
L1
U1
St ep-up
Regulat or
D1
C8
Figure 25: VCC circuit example with separate supply for SARA-R412M modules
Reference Description Part Number - Manufacturer
C1
100 µF Capacitor Tantalum B_SIZE 20% 6.3V 15mΩ
T520B107M006ATE015 – Kemet
C2 100 nF Capacitor Ceramic X7R 0402 10% 16 V GRM155R61A104KA01 - Murata
C3 10 nF Capacitor Ceramic X7R 0402 10% 16 V GRM155R71C103KA01 - Murata
C4 56 pF Capacitor Ceramic C0G 0402 5% 25 V GRM1555C1E560JA01 - Murata
C5 15 pF Capacitor Ceramic C0G 0402 5% 25 V GRM1555C1E150JA01 - Murata
C6 10 µF Capacitor Ceramic X5R 0603 20% 6.3 V GRM188R60J106ME47 - Murata
C7 22 µF Capacitor Ceramic X5R 1210 10% 25 V GRM32ER61E226KE15 - Murata
C8 10 pF Capacitor Ceramic C0G 0402 5% 25 V GRM1555C1E100JA01 - Murata
D1 Schottky Diode 40 V 1 A SS14 - Vishay General Semiconductor
L1
10 µH Inductor 20% 1 A 276 mΩ
SRN3015-100M - Bourns Inc.
R1
1 MΩ Resistor 0402 5% 0.063 W
Generic manufacturer
R2
412 kΩ Resistor 0402 5% 0.063 W
Generic manufacturer
U1 Step-up Regulator 350 mA AP3015 - Diodes Incorporated
Table 17: Examples of components for the VCC circuit with separate supply for SARA-R412M modules
☞
☞☞
☞ See the section 2.2.1.10, and in particular Figure 27 / Table 19, for the parts recommended to be provided if the
application device integrates an internal antenna.