Integration Manual
SARA-R4/N4 series - System Integration Manual
UBX-16029218 - R13 Approvals Page 103 of 119
4.4 European Conformance CE mark
SARA-R410M-02B and SARA-R412M-02B module product versions have been evaluated against the essential
requirements of the Radio Equipment Directive 2014/53/EU.
In order to satisfy the essential requirements of the 2014/53/EU RED, the modules are compliant with the following
standards:
• Radio Spectrum Efficiency (Article 3.2):
o EN 301 908-1
o EN 301 908-13
o EN 301 511
• Electromagnetic Compatibility (Article 3.1b):
o EN 301 489-1
o EN 301 489-52
• Health and Safety (Article 3.1a)
o EN 62368-1
o EN 62311
⚠
⚠⚠
⚠
Radiofrequency radiation exposure Information: this equipment complies with radiation exposure limits prescribed
for an uncontrolled environment for fixed and mobile use conditions. This equipment should be installed and
operated with a minimum distance of 20 cm between the radiator and the body of the user or nearby persons. This
transmitter must not be co-located or operating in conjunction with any other antenna or transmitter except as
authorized in the certification of the product.
⚠
⚠⚠
⚠
The gain of the system antenna(s) used for the SARA-R410M-02B and SARA-R412M-02B modules (i.e. the combined
transmission line, connector, cable losses and radiating element gain) must not exceed the values stated in the
Declaration of Conformity of the modules, for mobile and fixed or mobile operating configurations:
• SARA-R410M-02B modules:
o 8.2 dBi in 800 MHz, i.e. LTE FDD-20 band
o 8.4 dBi in 900 MHz, i.e. LTE FDD-8 band
o 11.3 dBi in 1800 MHz, i.e. LTE FDD-3 band
• SARA-R412M-02B modules:
o 8.2 dBi in 800 MHz, i.e. LTE FDD-20 band
o 3.21 dBi in 900 MHz, i.e. GSM 900 / LTE FDD-8 band
o 9.09 dBi in 1800 MHz, i.e. GSM 1800 / LTE FDD-3 band
The conformity assessment procedure for the SARA-R410M-02B and SARA-R412M-02B modules, referred to in Article 17
and detailed in Annex II of Directive 2014/53/EU, has been followed.
Thus, the following marking is included in the product: