User's Manual
12 || G7 TECHNICAL USER MANUAL
POWER ON
How do I turn on my G7c?
Press and hold the power button, and wait for the blinking green connectivity light to
turn solid. When connected, the green light will remain solid.
How do I turn on my G7x?
Press and hold the power button on your G7 Bridge to turn it on rst, and wait for the
blinking green connectivity light to turn solid, it takes approximately two minutes for G7
Bridge to connect to the Blackline Safety Network. When connected, the green light will
remain solid.
Press and hold the power button on your G7x. Wait for the blinking green connectivity
light to turn solid. When connected, the green light will remain solid.
NOTE: For best results, ensure your G7 Bridge is turned on before your G7x. If you are having
diculties connecting your G7x to G7 Bridge, please refer to your G7 Bridge manual.
POWER OFF
How do I turn o my G7c?
Press and hold the power button. The device will go into shutdown sequence, once all
the lights and vibrations have stopped, you have been logged o from the Blackline
Safety Network.
How do I turn o my G7x?
Press and hold the power button of your G7x. The device will go into shutdown
sequence, sending your log off status to G7 Bridge.
When suitably powered, G7 Bridge can remain on at all times. When G7 Bridge is o, all
connected devices will no longer be monitored. Before powering down, ensure there
are no other G7x devices connected. Once conrmed, press and hold the power button
on the G7 Bridge. The device will go into shutdown sequence. Your safety is no longer
being monitored.
NOTE: For more information, please refer to the G7 Bridge technical user manual.