User's Manual

TOBY-R2 series - System Integration Manual
UBX-16010572 - R04 Approvals
Page 132 of 147
4.3 Innovation, Science and Economic Development Canada notice
ISED Canada (formerly known as IC - Industry Canada) Certification Numbers:
 u-blox TOBY-R200 cellular modules: 8595A-1EHM44NN
 u-blox TOBY-R202 cellular modules: 8595A-1EHQ24NN
4.3.1 Declaration of Conformity
This device complies with Part 15 of the FCC rules and with the ISED Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
 this device may not cause harmful interference
 this device must accept any interference received, including interference that may cause undesired operation
Radiofrequency radiation exposure Information: this equipment complies with radiation
exposure limits prescribed for an uncontrolled environment for fixed and mobile use conditions.
This equipment should be installed and operated with a minimum distance of 20 cm between
the radiator and the body of the user or nearby persons. This transmitter must not be
co-located or operating in conjunction with any other antenna or transmitter except as
authorized in the certification of the product.
The gain of the system antenna(s) used for the TOBY-R2 series modules (i.e. the combined
transmission line, connector, cable losses and radiating element gain) must not exceed the value
stated in the IC Grant for mobile and fixed or mobile operating configurations:
o TOBY-R202 modules:
o 6.7 dBi in 700 MHz, i.e. LTE FDD-12 band
o 6.7 dBi in 850 MHz, i.e. UMTS FDD-5 or LTE FDD-5 band
o 7.9 dBi in 1700 MHz, i.e. LTE FDD-4 band
o 8.5 dBi in 1900 MHz, i.e. UMTS FDD-2 or LTE FDD-2 band
o TOBY-R200 modules:
o 6.7 dBi in 700 MHz, i.e. LTE FDD-12 band
o 6.7 dBi in 850 MHz, i.e. UMTS FDD-5 or LTE FDD-5 band
o 7.8 dBi in 1700 MHz, i.e. LTE FDD-4 band
o 8.3 dBi in 1900 MHz, i.e. UMTS FDD-2 or LTE FDD-2 band
o 0.7 dBi in 850 MHz, i.e. GSM 850
o 2.2 dBi in 1900 MHz, i.e. GSM 1900
4.3.2 Modifications
The ISED Canada requires the user to be notified that any changes or modifications made to this device that are
not expressly approved by u-blox could void the user's authority to operate the equipment.
Manufacturers of mobile or fixed devices incorporating the TOBY-R2 series modules are
authorized to use the ISED Canada Certificates of the TOBY-R2 series modules for their own
final products according to the conditions referenced in the certificates.