User's Manual
Table Of Contents
- Contents
- 1 Functional description
- 2 Interfaces
- 3 Pin definition
- 4 Electrical specifications
- 4.1 Absolute maximum rating
- 4.2 Operating conditions
- 4.2.1 Operating temperature range
- 4.2.2 Supply/power pins
- 4.2.3 Current consumption
- 4.2.4 LTE RF characteristics
- 4.2.5 3G RF characteristics
- 4.2.6 2G RF characteristics
- 4.2.7 ANT_DET pin
- 4.2.8 PWR_ON pin
- 4.2.9 RESET_N pin
- 4.2.10 SIM pins
- 4.2.11 USB pins
- 4.2.12 DDC (I2C) pins
- 4.2.13 Generic Digital Interfaces pins
- 5 Mechanical specifications
- 6 Qualification and approvals
- 7 Product handling & soldering
- 8 Default settings
- 9 Labeling and ordering information
- Appendix
- A Glossary
- Related documents
- Revision history
- Contact
TOBY-R2 series - Data Sheet
UBX-16005785 - R06 Related documents
Page 40 of 41
Related documents
[1] u-blox AT Commands Manual, Docu No UBX-13002752
[2] u-blox TOBY-R2 series System Integration Manual, Docu No UBX-16010572
[3] u-blox Android RIL Production delivery Application note, Docu No UBX-13002041
[4] u-blox Windows Embedded RIL Production delivery Application note, Docu No UBX-13002043
[5] u-blox GNSS Implementation Application Note, Docu No UBX-13001849
[6] u-blox Mux Implementation Application Note, Docu No UBX-13001887
[7] u-blox Package Information User Guide, Docu No UBX-14001652
[8] 3GPP TS 27.007 - AT command set for User Equipment (UE)
[9] 3GPP TS 27.005 - Use of Data Terminal Equipment - Data Circuit terminating Equipment (DTE - DCE)
interface for Short Message Service (SMS) and Cell Broadcast Service (CBS)
[10] 3GPP TS 27.010 - Terminal Equipment to User Equipment (TE-UE) multiplexer protocol
[11] 3GPP TS 36.521-1 - Evolved Universal Terrestrial Radio Access; User Equipment conformance specification;
Radio transmission and reception; Part 1: Conformance Testing
[12] 3GPP TS 34.121-1 - User Equipment conformance specification; Radio transmission and reception (FDD);
Part 1: Conformance specification
[13] 3GPP TS 51.010-1 - Mobile Station conformance specification; Part 1: Conformance specification
[14] ITU-T Recommendation V24, 02-2000. List of definitions for interchange circuits between Data Terminal
Equipment (DTE) and Data Connection Equipment (DCE)
[15] Universal Serial Bus Revision 2.0 specification, http://www.usb.org/developers/docs/usb20_docs/
[16] I
2
C-bus specification and user manual - Rev. 5 - 9 October 2012 - NXP Semiconductors,
http://www.nxp.com/documents/user_manual/UM10204.pdf
For regular updates to u-blox documentation and to receive product change notifications please register
on our homepage (www.u-blox.com).
Revision history
Revision
Date
Name
Comments
R01
03-Mar-2016
sses
Initial release
R02
31-May-2016
sses
Improved description of VCC, Power-on, Reset, Host select, UART, USB, GPIO pins
R03
11-Jul-2016
sses
Added current consumption and RF performance figures
Remarked HSDPA Category 8
Updated description of Power-on, Reset, Host select, UART, USB pins
R04
22-Sep-2016
sses
Updated status to Advance Information
Updated PWR_ON, ANT_DET, GPIO and Clock Output description.
Added 2G current consumption figures.
R05
10-Oct-2016
lpah
Document reverted to Objective Specification
TOBY-R200-02B prototypes information. Added remark in mechanical specifications.
R06
22-Dec-2016
sses
Document applicability updated to TOBY-R200 and TOBY-R202
Updated Power-on and Power-off sections.