User's Manual

SARA-G3 and SARA-U2 series - System Integration Manual
UBX-13000995 - R18 Advance Information Approvals
Page 174 of 206
4.2 US Federal Communications Commission and Industry Canada notice
US Federal Communications Commission (FCC) ID:
x For SARA-G310 modules: XPYSARAG350
x For SARA-G350 modules: XPYSARAG350
x For SARA-U201 modules: XPY1CGM5NNN
x For SARA-U260 modules: XPYSARAU260
x For SARA-U280 modules: XPYSARAU280
Industry Canada (IC) Certification Numbers:
x For SARA-G310 modules: 8595A-SARAG350
x For SARA-G350 modules: 8595A-SARAG350
x For SARA-U201 modules: 8595A-1CGM5NNN
x For SARA-U260 modules: 8595A-SARAU260
x For SARA-U280 modules: 8595A-SARAU280
4.2.1 Safety warnings review the structure
x Equipment for building-in. The requirements for fire enclosure must be evaluated in the end product
x The clearance and creepage current distances required by the end product must be withheld when the
module is installed
x The cooling of the end product shall not negatively be influenced by the installation of the module
x Excessive sound pressure from earphones and headphones can cause hearing loss
x No natural rubbers, no hygroscopic materials nor materials containing asbestos are employed
4.2.2 Declaration of conformity
This device complies with Part 15 of the FCC rules and with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
x this device may not cause harmful interference
x this device must accept any interference received, including interference that may cause undesired operation
Radiofrequency radiation exposure Information: this equipment complies with FCC radiation
exposure limits prescribed for an uncontrolled environment for fixed and mobile use conditions.
This equipment should be installed and operated with a minimum distance of 20 cm between
the radiator and the body of the user or nearby persons. This transmitter must not be
co-located or operating in conjunction with any other antenna or transmitter except in
accordance with FCC procedures and as authorized in the module certification filing.
The gain of the system antenna(s) used for SARA-G310 / SARA-G350 modules (i.e. the combined
transmission line, connector, cable losses and radiating element gain) must not exceed 8.39 dBi
(850 MHz) and 3.11 dBi (1900 MHz) for mobile and fixed or mobile operating configurations.
The gain of the system antenna(s) used for SARA-U260 modules (i.e. the combined transmission
line, connector, cable losses and radiating element gain) must not exceed 3.5 dBi (850 MHz) and
3.1 dBi (1900 MHz) for mobile and fixed or mobile operating configurations.
The gain of the system antenna(s) used for SARA-U280 modules (i.e. the combined transmission
line, connector, cable losses and radiating element gain) must not exceed 10.0 dBi (850 MHz)
and 10.3 dBi (1900 MHz) for mobile and fixed or mobile operating configurations.