User's Manual

SARA-G3 and SARA-U2 series - System Integration Manual
UBX-13000995 - R18 Advance Information System description
Page 10 of 206
Table 2 reports a summary of cellular radio access technologies characteristics of SARA-G3 and SARA-U2 series
modules.
1.2 Architecture
Figure 1 summarizes the architecture of SARA-G300 and SARA-G310 modules, while Figure 2 summarizes the
architecture of SARA-G340 and SARA-G350 modules, describing the internal blocks of the modules, consisting
of the RF, Baseband and Power Management main sections, and the available interfaces.
Memory
V_BCKP (RTC)
V_INT (I/O)
32 kHz
26 MHz
RF
Transceiver
Power
Management
ANT
SAW
Filter
Switch
VCC (Supply)
32 kHz
Auxiliary UART
SIM
UART
Power-On
Reset
Cellular
BaseBand
Processor
PA
Figure 1: SARA-G300 and SARA-G310 modules block diagram
Memory
V_BCKP (RTC)
V_INT (I/O)
26 MHz
32.768 kHz
RF
Transceiver
Power
Management
Cellular
BaseBand
Processor
ANT
SAW
Filter
Switch
PA
VCC (Supply)
Auxiliary UART
DDC (for GNSS)
SIM Card Detection
SIM
UART
Power-On
Reset
Digital Audio
Analog Audio
GPIO
Antenna Detection
Figure 2: SARA-G340 and SARA-G350 modules block diagram