User's Manual

TH-9000

Function Setup By Microphone Keypad

squelch off :In standby, press key, the squelch is disabled

when icon , flashed in LCD,Press again to enable

squelch and the icon disappears.

Switches between VFO and channel mode

In standby,press key to switch between channel mode and Frequency mode (VFO).

Short Calling

In standby,press to transmit the selected DTMF/2TONE/5TONE in current channel.

Transmitting DTMF Code:In standby,press ,LCD displays DTMF data and group.

Press [ / ] key to select the desired transmitting DTMF group,then Press PTT

to transmit.

If no DTMF data in current group,LCD displays "EMPTY",press key again and input

desired DTMF code by keypad,press PTT to transmit and store DTMF data.

Squelch Level

1. In standby,press ,then press ,LCD displays "SQL" and current squelch level.

2. Press / to adjust the desired squelch level.(press ,then press ,

turn selector knob also can adjust the desired squelch level.

3. Press number key to confirm and exit.

Optional signaling

In standby,press ,then press to add optional signaling, repeat above operation

to set DTMF,2TONE or 5TONE signaling.

DOWN

Microphone Operation

Numeric Keys

DTMF ON/OFF

Speaker

Lock

PTT

UP DOWN

You can operate the transceiver by keypad or input desired frequency or channel through

the microphone (Note:In professional transceiver mode,other keys are invalid except PTT,

[ / ], and ).

Keypad Lock

Pull down the slide switch to lock position,The lamp is turned off and all of keypads is not

work except PTT switch.

Transmitting DTMF By Microphone Keypad

Slide DTMF key to DTMF position, press and hold the [PTT] key, transmitting the desired

DTMF signaling by the numeric key directly. (Note:Slide DTMF key to DTMF position,the

keyboard is invalid in standby ).

DOWN