Safety Instructions
Applying a Blood Sample to the Test Strip
SAMPLE MAY BE OBTAINED FROM FINGER, PALM, OR FOREARM
1. Introduce the tip of the test strip to the drop of blood. Blood sample will be automatically drawn into the test strip
(Fig.36). Discard the rst drop of blood sample to prevent contamination.
2. Hold the tip of the test strip touching the blood drop until the meter beeps.
3.
If applying insucient blood sample, the error code (E-7) will appear on the display (Fig. 37).
4. The meter will start to countdown as soon as the blood has completely lled the conrmation window of the
test strip. The test result will appear on the display in 5 seconds (Fig. 38). The result will be showed and
stored into the meter memory automatically (Fig. 39).
5. After the test strip is ejected, the meter will automatically turn o after 1 minute or the meter can be turned o
immediately when is pressed.
6. If the test strip is not ejected after test, the meter will automatically turn o after 2 minutes.
(Fig.36)
Sucient
Blood
Insucient
blood
(Fig.37)
(Fig.38)
(Fig.39)
18