User Manual

TyRex TOOL & PARTS WARRANTY
This tool has been designed and constructed using
the highest standards of material and workmanship.
TOOL AND PARTS WARRANTY:
The length of this guarantee is one year from date of purchase by the original retail purchaser. During this period, Rex Commer-
cial Tools and Fasteners, LLC, will repair or replace at Rex’s option, any original part or parts for the original retail purchaser. This will be done
free of charge, provided the parts are determined defective in materials or workmanship upon examination by a TyRex Authorized Warranty
Service Center (exception: power cords and bits). Any replacement part provided will carry a warranty for the balance of the period of warranty
applicable to the part it replaces. This warranty will be honored, only if:
A) No evidence of abuse, or failure to follow recommended operational maintenance, or modification of the tool is present (read Operator
Manual for use and maintenance instructions);
B) When repair or replacement of parts or tools is necessary, the original retail purchaser returns the complete tool or part, with transportation
prepaid, to the nearest TyRex Authorized Warranty Service Center, with purchase receipt or other positive proof that the part or tool is
within the warranty period.
THIS WARRANTY IS THE ONLY WARRANTY ON THIS TOOL, AND ALL OTHER WARRANTIES, WHETHER ORAL, WRITTEN, EXPRESS, OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE
EXCLUDED. BUYER’S OR USER’S REMEDIES ARE SOLELY AND EXCLUSIVELY AS STATED ABOVE. REX COMMERCIAL TOOLS AND FASTENERS,
LLC SHALL IN NO EVENT BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, OR SPECIAL DAMAGES. IN NO EVENT, WHETHER AS A
RESULT OF A BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING NEGLIGENCE) OR OTHERWISE, SHALL DURASPIN’S LIABILITY EXCEED THE
PRICE OF THE TOOL WHICH HAS GIVEN RISE TO THE CLAIM OR LIABILITY. ANY LIABILITY CONNECTED WITH THE USE OF THIS TOOL SHALL
TERMINATE UPON THE EXPIRATION OF THE WARRANTY PERIOD SPECIFIED ABOVE.
Replacement of Tool Due to Natural Disaster
Rex will also replace any tool destroyed by an Act of God such as flood, earthquake, hurricane or other disaster resulting only from the forces
of nature. Such a claim will be honored provided that such original retail purchaser had previously submitted a completed warranty registra-
tion card, and then submits proof of ownership and an acceptable statement describing such Act of God documented by an insurance carrier,
police department, or other official governmental source. To obtain instructions for filing a claim call 1-800-396-3318.
Rex Commercial Tools and Fasteners, LLC
CINCINNATI, OHIO 45245-1213 USA
TECHNICAL SPECIFICATIONS: TY0100
Weight without rail 13.7 oz
Height without rail 1.6"
Length at 1" setting 6.8"
Width 2.1"
Fastener Capacity 50 screws (one strip)
Fastener Range
1
/2-1
1
/2" 6-#12
ESPECIFICACIONES TECNICAS: TY0100
Peso sin el carril 388g
Alto sin el carril 41 mm
Largo en el 1"que fija 172 mm
Profundidad 53 mm
Capacidad tornillos 50 tornillos (una faja)
Gama de tornillos 13-38 mm de largo cuerpo
SPÉCIFICATIONS TECHNIQUES: TY0100
Poids sans la voie 388g
Hauteur sans la voie 41 mm
Longueur à 1"plaçant 172 mm
Largeur 53 mm
Capacité fixations 50 vis (une bande)
Longueurs des fixations
13-38 mm de largo cuerpo
TECHNICAL SPECIFICATIONS: TY0200
ESPECIFICACIONES TECNICAS: TY0200
SPÉCIFICATIONS TECHNIQUES: TY0200
TECHNICAL SPECIFICATIONS: TY0300
ESPECIFICACIONES TECNICAS: TY0300
SPÉCIFICATIONS TECHNIQUES: TY0300
Weight without rail 14.6 oz
Height without rail 1.6"
Length at 1" setting 6.8"
Width 2.1"
Fastener Capacity 50 screws (one strip)
Fastener Range
1
/2-2" 6-#12
Peso sin el carril 414g
Alto sin el carril 41 mm
Largo en el 1"que fija 172 mm
Profundidad 53 mm
Capacidad tornillos 50 tornillos (una faja)
Gama de tornillos 13-51 mm de largo cuerpo
Poids sans la voie 414g
Hauteur sans la voie 41 mm
Longueur à 1"plaçant 172 mm
Largeur 53 mm
Capacité fixations 50 vis (une bande)
Longueurs des fixations
13-51 mm de largo cuerpo
Weight without rail 15.1 oz
Height without rail 1.6"
Length at 1" setting 7.8"
Width 2.1"
Fastener Capacity 50 screws (one strip)
Fastener Range
1
/2-3" 6-#12
Peso sin el carril 428g
Alto sin el carril 41 mm
Largo en el 1"que fija 198 mm
Profundidad 53 mm
Capacidad tornillos 50 tornillos (una faja)
Gama de tornillos 13-76 mm de largo cuerpo
Poids sans la voie 428g
Hauteur sans la voie 41 mm
Longueur à 1"plaçant 198 mm
Largeur 53 mm
Capacité fixations 50 vis (une bande)
Longueurs des fixations
13-76 mm de largo cuerpo