User Manual

V1.01-FJ04 (1105068)
38
The following checklist will help you remedy problems you may
encounter with your unit. Before going through the checklist below,
check the connection and operating procedures.
1. Indications disappear from / do not appear in the displa y.
A. Please make sure if power switch is on.
B. Please make sure if monitor has battery inserted.
C. Be sure the power of battery is enough.
D. Be sure to observe the correct polarity when installing the
batteries.
E. If these solutions do not help improve the situation, consult y our
nearest Tyredog dealer.
2. No connection between sensors and monitor.
A. Please make sure if sensor has battery (CR1632) inserted.
B. Be sure to observe the correct polarity when installing sensor
batteries.
C. Battery could run out of power and we s uggest to replace with
new battery.
D. If these solutions do not help improve the situation, consult your
nearest Tyredog dealer.
3. Monitor display color is get t ing dark.
When monitor temper ature is over 80 , it is natur al that LCD panel ℃
will be getting dark. When monitor temperature is back to normal,
LCD panel will be normal again.
Troubleshooting