INDEX Precautions..................................................................................3 The Main Purpose........................................................................4 The Feature of TD4100A-X .........................................................6 Installation ................................................................................6 Management .............................................................................7 Reliability and Robust .............................
Pressure warning value setting............................................. 25 Temperature warning value.................................................. 25 Sensor learning mode.......................................................... 31 Operation instructions .............................................................. 32 1. Main screen ................................................................... 32 2. Automatically power off .................................................. 32 3.
Precautions 1. Due to rubber valve stem aging under high temperature and expose under the sun, which may cause crack on the rubber stem, therefore, we recommended metal type of valve stem. 2. Please make sure the LCD display can receive signals from two tire pressure sensors. 3. Tyredog TPMS has unique anti-theft tool to prevent sensor being stolen. You can decide whether install or not. 4. Please double confirm if sensors are fitted tightly.
10. If you have any questions or problems concerning your unit that are not covered in this manual, please consult your nearest Tyredog dealer. The Main Purpose The Tire Pressure Monitoring System (TPMS) is an efficient and effective solution to many of current motorcycle safety problems. TPMS will help prevent driving on deflated tires and reduce fuel consumption. There are benefits here: Improves ride performance and handling Tire pressure leads to driving condition a lot.
Reduces fuel expense Fuel efficiency is reduced by one percent for every 3 PSI of under inflation. It is for sure that tire pressure is also one of important factors to save gas consumption. Extends tire life Research finds that running tires 20% under –inflation can reduce tire life by up to 50%.
The Feature of TD4100A-X TYREDOG TPMS (Tire Pressure Monitoring System) - Powerful tool for maximizing uptime and improving safety- The New WTPMS StandardTYREDOG Tire Pressure/ Temperature Monitoring Solutions. TYREDOG is a leading WTPMS solution for motorcycle industry. By continuing to develop new and better TPMS designs and manufacturing technologies, TYREDOG has helped motorcycle riders to improve safety issues and reduce operational costs.
with specially designed electronic sensors. Management Graphic user interface: Powerful graphical user interface for rapid understandings of tire status. Real-time: high accuracy, real-time monitoring tire pressure and temperature and accuracy achieve 1 PSI difference. Adjustable: fully adjustable pressure and temperature warning range. Warnings: you will be award of abnormal status of tire pressure easily from the vibration of receiver or from beep sounds.
Location of controls and outlook Monitor description ．LCD monitor ．Temperature. ．Backlight ．Power switch ．SET Front of monitor ．Battery cover Back of monitor Sensor description Sensor battery cover Valve stem connection 8 V1.
Graphic User Interface and Contents Tire Pressure Tire Status: Connection Status: Low Pressure : Data Received High Pressure (No icon)：Data Not Received High Temperature Sensor Power Status: : Low Battery (No icon)： Normal Time Display Pressure Measuring Unit： Monitor Power Status: : Low Battery (No icon)： Normal Tire Temperature：°C / °F Temperature Measuring Unit：°C / °F 9 V1.
System map Installation The installation of LCD monitor Insert battery： A. Prepare one AAA-type battery. 10 V1.
B. Place finger tips near convex bottom edge and open the battery cover. 2 1 C. Install battery, please follow battery compartment battery direction icon. D. After battery inserted, the LCD monitor will automatically power on and the display will show graphics as picture below. 11 V1.
E. Please be careful with the battery cover hook and avoid damage the hooking. F. Please carefully aligned, and press the battery cover make sure the hook is in the slot to avoid water leakage around the battery compartment. Caution： Before installation, make sure the battery waterproof gasket is in place prohibit to use any sharp object to pick the gasket hook to avoid damage. 12 V1.
The installation of tire pressure sensors As sensor has its own position, you have to make sure its defined position. When inserting batteries in every sensors please don’t mix up sensor caps. Sensor map could give guidance for user to install. Sensor map Number 1 means front tire. Number 2 means rear tire. Insert batteries in sensors： Battery installation for tire pressure sensor A. Take away sensor cap in anti-clockwise direction. 13 V1.
B. Insert lithium battery and make sure battery polarity correct when insert it. Right now, monitor will receive signals from corresponding sensors and report pressure value on the screen. At first, you will find that the value shows “00.0”. It is because sensors have not been mounted yet. The screen could show as below. Blinking Take number 1 for example Note：After take away battery, the status of being without battery need to leave for 10 seconds and then insert battery again.
C. Fit sensor cap in a clockwise direction. Please refer to “sensor map” to make sure the right position of each sensor and please don’t mix up sensor caps either. You will find either sensor cap and sensor body have marks to remind user of its position. Take number 1 for example Anti –theft tool for sensor (optional) Anti –theft tool is designed to prevent the possibility of sensors being taken away. Users can decide if it is needed or not. 15 V1.
Valve Hex socket Screw Anti-theft fixed ring Sensor A. Put anti-theft fixed ring onto valve stem. (Before installed sensor, please make sure the valve stem is properly clean, so there is no affect during tire pressure measurements.) B. Install sensors onto valve stem. Don’t install sensors by brute force. 16 V1.
C. Now, the display will show you the latest valve of tire pressure. Take number 1 for example D. Adjust the anti-theft fixed ring position to install it with sensor in place firmly. E. Put the hex socket screw onto the anti-theft fixed ring. (Please don’t exert excessively to damage the valve.) 17 V1.
F. When two tire pressure sensors are installed, please check with soap water if the tire pressure sensors and tire valve is completely fitted without any air leakage. (spread soap water on the valve stem) G. The anti-theft tool can be decided to install or not. If not, step A, C and D could be just skipped. 18 V1.
Install monitor to the handle bar bracket Two combinations of a fixed bracket. Method A：This method can directly assemble the bracket on the Brake Fluid Reservoir. Step 1. Place the ball shape fastener into the Y shape clamping until hear click sound. Step 2. Install the adjustable holder screw and adjust with a slotted screwdriver to appropriate screw tension. Method A Figure 19 V1.
Remove the original screw from Brake Fluid Reservoir and align bracket, then install the screw back Please use proper force tighten the screw. Method B：This method may be locking with method A on a variety of handle bar diameters. Step 1. Make sure the handle bar diameter to be locking, and a corresponding diameter of the anti slip holder mounting plate placed in the handle bar. Step 2. Install the bracket to the handler bar and properly tighten the screw. 20 V1.
Method B Figure： Upright to the handle Parallel Parallel to the handle bar (front) Parallel to the handle bar (rear) The anti slip pad can be fixed in three sizes 1. Handle bar diameter 1 1/8〞(28mm) 2. Handle bar diameter 1 〞(25mm) 3. Handle bar diameter 7/8〞(22mm) Install monitor on the bracket Make sure the monitor is properly click with the holder. 21 V1.
Caution： 1. Recommend not to use other screw for replacement of original screw to prevent damage. 2. Do not over force tighten the holder screw to avoid damage on the Y shape bracket. 3. Strongly suggest use the silicon cover for extra protection. 4. If the silicon cover is wet, please dry with nature air before use. 22 V1.
Operation instructions Monitor basic function Locations and function buttons Backlight Set: pressure unit setting temperature unit setting pressure warning value setting temperature warning value setting Learning mode Temperature Power switch: on/ off Basic function Power Switch Press once Power on LCD monitor Press for over 3 seconds Power off LCD monitor 23 V1.
Display tire temperature figures Push this button, the LCD monitor will display tire temperature instead of tire pressure. Display tire temperature Backlight: on/ off When in darkness, you also can check out tire pressure and temperature by pressing backlight button. The backlight will be off after 15 seconds. 24 V1.
Advanced setting mode Three Seconds Pressure unit setting Temperature unit setting Pressure warning value setting Temperature warning value Press “ Backlight button” for over 3 seconds to enter advanced setting mode. Make choice by pressing “Backlight button” and can adjust warning values. 25 V1.
A. Set pressure measuring unit： Four types of pressure measuring units: PSI,KPA,BAR and ㎏/㎝ 2 are provided here. Users can make their own choices by “Temperature button”. B. Set temperature measuring unit: ℃ and ℉ Two types of temperature measuring units: ℃ and ℉ are provided here. Users can make their own choices by “Temperature button”. 26 V1.
C. Setting front wheel lower pressure warning value： Setting front wheel lower pressure warning value, adjust setting with flush icon. Press temperature button and backlight button for adjustment .The default value is 26 PSI. Blinking D. Setting front wheel upper pressure warning value Setting front wheel upper pressure warning value，adjust setting with flush icon。Press “Temperature button” for adjustment. The default value is 45 PSI. Blinking 27 V1.
E. Set front wheel temperature upper warning value The default value is 70 ℃ and users can make their own choices by “Temperature button”. Blinking F. Setting rear wheel lower pressure warning value Setting rear wheel lower pressure warning value, adjust setting with flush icon. Press for “Temperature button” adjustment. Blinking 28 V1.
G. Setting rear wheel upper pressure warning value Setting rear wheel upper pressure warning value, adjust setting with flush icon. Press “Temperature button” for adjustment. Blinking H. Set up rear high temperature when the icons flush. The factory setting is 70 ℃, press “Temperature button” for adjustment. Blinking 29 V1.
I. Set up monitor time value, adjust setting with flush icon. Press “Temperature button” for adjustment. Blinking Blinking Note：When battery inserted, time value will be resetting, so you can adjust time again after battery inserting. This mode will return to main screen as long as there is no operation for more than 25 seconds. 30 V1.
Five Seconds Sensor learning mode In a very unlike case, sensor could be broken or missed. Sensor learning mode can provide an alternative way to replace sensors with ‘learnable sensors’. (‘Learnable sensor’ will need to purchase separately.) LCD monitor can reload new identified number only from ‘learnable sensor.’ By obtaining new identified number from new ‘learnable sensor’, the system will integrate this sensor into its system and replace old one.
Operation instructions 1. Main screen Switch on LCD monitor to boot up, and LCD monitor will be communicating with sensors and showing tire pressure values that is kept from last time before system was off. In this mode, you will find the time icon will be showing. 2. Automatically power off For power saving purpose, very intelligent design in this system could automatically enter sleeping mode as long as the monitor has not been vibrated for more than 20 minutes.
3. Abnormal status A. Tire pressure below lower warning value When tire pressure is below lower warning value (default value= 26 PSI), LCD will appear icon blinks. Push any button, then the LED warnings will be disable. Blinking Take number 1 for example B. Tire pressure higher than upper warning value When tire pressure is higher than upper warning value, (default value= 45 PSI), LCD will appear icon blinks. Push any button, then the LED warnings will be disable.
(default value= 70℃), LCD will appear icon blinks. Push any button, then the LED warnings will be disable. Blinking Take number 1 for example D. LCD monitor runs out to power Battery power in monitor will decrease by daily operation and when power level is lower to some extent, the monitor battery low indicator will appear to remind rider of time to replace battery. The icon is shown as picture below. E.
The icon is shown as picture below. Take number 1 for example 35 V1.
The definition of warnings Item 1. Status Purpose Pattern Tire pressure is below The warning of low LCD will appear lower warning range. tire pressure. icon blinks. Push any button, then the LED warnings will be disable. 2. 3. The warning of tire LCD will appear below lower warning pressure getting icon blinks. range, each 1 PSI lower. Push any button, then the When tire pressure is down, warnings will be LED warnings will be given as well. disable.
6. 7. When ire temperature is The warning of tire LCD will appear higher than upper temperature getting icon blinks. warning range, each 1 high. Push any button, then the PSI up, warnings will be LED warnings will be given as well. disable. Learnable sensor is Finish learning LED warnings alert integrated. mode. once. 37 V1.
Troubleshooting The following checklist will help you remedy problems you may encounter with your unit. Before going through the checklist below, check the connection and operating procedures. 1. Indications disappear from / do not appear in the display. A. Please make sure if power switch is on. B. Please make sure if monitor has battery inserted. C. Be sure the power of battery is enough. D. Be sure to observe the correct polarity when installing the batteries. E.
4. When temperature is below -20℃, the response time of CD monitor could be slower. 5. ‘Learning mode’ can only accept ‘learnable sensor’ but not standard sensor. 39 V1.
Additional Information Under normal conditions, sensor batteries will last approximately 1~2 years. LCD monitor will last around 6 months. (The service life may be shorter, depending on the conditions of use.) When the battery becomes weak, the power low indicator will appear on the screen. Replace the battery with a new CR1632 lithium battery for sensor or with AAA 1.5 battery for LCD monitor. Notes on battery Keep the battery out of the reach of children.
Package content Here are items in whole package. Item Photo number TD4100A-X LCD monitor 1 pieces Ball shape turning fastener 1 pieces Y shape clamping 1 pieces Adjustable for holder screw 1 pieces Handle bar bracket 1 pair 41 V1.
1 1/8〞Handle bar anti slip gasket 1 pair 7/8〞Handle bar anti slip gasket 1 pair 1〞Handle bar anti slip gasket 1 pair Screw for handle bar bracket 2 pieces Silicon cover 1 pieces 42 V1.
TD4100A-X tire pressure sensor 2 pieces CR1632 battery 2 pieces Anti-theft tool User guide Spanner 1 piece Anti-theft fixed ring 2 pieces Hex socket screw 2 pieces 1 piece AAA 1.5V battery 1 piece 43 V1.
Product Specifications Tire pressure sensor specifications Frequency 433.92MHz Tire pressure range 0 ~ 60PSI Accuracy Tire pressure ±1 PSI / tire temperature ±2 ℃ Operating voltage 3V DC Operating temperature -40℃~125℃ Battery life 1~2 years (depends on working hours per day) Dimensions Diameter 20.5mm X height 20mm Weight 10±1 g LCD monitor specifications Frequency 433.92MHz Operating voltage 1.
