- BLANK -
INDEX IMPORTANT INFORMATION ................................................................3 TPMS ADVANTAGES .......................................................................4 FEATURES ........................................................................................5 ITEM DESCRIPTIONS ........................................................................8 MONITOR DESCRIPTION ...................................................................8 RELAY DESCRIPTION .............................
INDEX Continued.. TYPE OF VEHICLE (WHEEL LAYOUTS) .............................................28 ADD NEW RELAY (RESET) .............................................................31 ADD NEW SENSOR ........................................................................33 HOW TO USE YOUR TPMS SYSTEM ..................................................36 TROUBLE SHOOTING .......................................................................41 PACKAGE CONTENTS - MONITOR .......................................
Important Information This product is designed to indicate the conditions of the air inside your vehicle’s tyres. It should not be considered as a device that will prevent any traffic accident, injury or death. Tyres and valve stems must be checked before installation. It is very common for rubber valve stems to require replacement without showing signs of wear. We recommend use on Metal type Valve Stems. Never overload your vehicle.
TPMS Advantages A Tyre Pressure Monitoring System (TPMS) is an efficient and effective solution to many current automotive safety issues. TPMS will help minimise driving risks and reduce fuel consumption. Some benefits include: z Ensures safe driving conditions. Tyre pressures can alter ride comfort and handling response. z Minimises chances of tyre blowout. Blowouts are a growing cause of road accidents. Even if a car can recover from a blowout, the damaged tyre left behind is an even greater hazard.
Exclusive Features TYREDOG is a powerful tool for maximising uptime and improving safety. TYREDOG sets a new standard in wireless tyre pressure monitoring systems. A leading WTPMS solution for the light to heavy-duty car and trucking industries, TYREDOG is continuously developing new and better TPMS designs and manufacturing technologies. TYREDOG has helped major players in the trucking industry improve safety and reduce operational costs.
Exclusive Features continued.. Operation z Real-time: Tyre pressures are updated automatically so there is no need to push buttons to check up on your tyres (except temperature). z Graphical user interface (GUI): All information is displayed together so unlike other systems, there is no need to scroll through each wheel to view status. z Adjustable: High and low warning alarms can be set ‘per axle.
Tyre Pressure & Safety Information x Please take the time to choose a suitable location so operation can be performed quickly and safely. o Be sure that the LCD monitor is firmly fixed to the windshield or dashboard using the supplied mounting hardware. o Please practice safe driving and only take the time necessary to read the information displayed on the screen. x Ensure the sensors communicate with the LCD monitor before initially fitting them to your tyres to save time and hassle.
Item Descriptions Monitor description Antenna LCD Monitor Screw hole for bracket Battery Cover Power Switch Backlight Temperature Mute 12/24VDC Input (Cigarette Lighter Adaptor) Front of Monitor Back of Monitor Important Note: The TD-2300A monitor has not been designed to work with Batteries and will only work using the cigarette lighter adaptor. However for testing, programming and trouble shooting purposes you can insert 2 x AA batteries. 8 TD-2300A Series V1.
Relay description Mounting holes Sync Button LED DC Socket Battery cover Antenna Top Bottom Monitor bracket description Set screw Monitor holder Fixed lock ring Holder arm base Suction cup control arm Bracket stand Monitor Bracket 3-way adapter description Connection to valve Connection to Sensor Hex socket set screw Inflation valve (The 3-way adapter is not included. Please purchase it separately. ) 9 TD-2300A Series V1.
Sensor Description The sensor has two sections: The sensor cap and sensor body. Its lightweight design and external application is intended to aid D.I.Y. installation.
Getting Started Example Diagram. Note：The 3-way adapter is not included and is for illustrative purposes only. Installation - RELAY The relay is the main link between the sensors and the monitor. Without it, the system will not function. It is recommended the relay be mounted in a central location with considerably even distance between the furthest forward and furthest rearward sensors. It is important to remember that sensors connect to the relay they are assigned to.
Installation - RELAY The relay can either be powered by 4 x AA batteries or it can be hardwired using the cable supplied. TIP: If using the hardwired power cable, we recommend that you connect to a permanent 12V/24V supply to ensure correct functionality of the relay. Connecting to a switched power source such as accessories or ignition, may cause synchronization issues with the monitor when powered up. BATTERY POWER To open the battery cover, undo the 12 Philips head screws.
Installation - RELAY Continued.. HARDWIRED (12V/24V) If using the included power cord, remove the DC socket plug at the bottom of the relay. (If not using the power cord, ensure this socket plug remains fitted as it seals the Relay from water etc.) When plugging in the DC plug, ensure it is plugged in firmly so it will not come loose. When inserted correctly, it will be sealed from water and other elements.
Installation - Mounting the Relay When fitting the Relay, time and care must be taken to properly decide on a mounting location. Some key factors that must be considered are: x The Relay must be mounted outside the vehicle. (not under bonnet) x Total distance between first and last sensors. x Total distance of car, truck, car + trailer etc.
Installation - Monitor / Receiver The TD-2300A Monitor must be powered up using the cigarette lighter adaptor supplied. Simply plug the power cord into the monitor like shown then connect the cigarette lighter plug to a D.C. Outlet Socket in the vehicle. 12V / 24V DC BATTERY POWER The TD-2300A Monitor has a provision for 2 x AA Batteries which can be inserted for Trouble Shooting and Testing Purposes Only. When the Monitor is using Battery Power, the Monitor will automatically turn off after 60 seconds.
Installation - Monitor / Receiver Bracket Monitor Bracket Screw Monitor Bracket Bracket Adaptor Ball Joint Ring Ball Joint Suction Cup Lock Suction Cup 1. Slide the Ball joint ring over the Ball Joint. 2. Insert the Ball Joint into the Bracket Adaptor. Your will here it ‘Pop In’. 3. Screw the Ball Joint Ring onto the Bracket Adaptor until had tight. 16 TD-2300A Series V1.
Installation - Monitor / Receiver Bracket 4. Place the Monitor Bracket into the Bracket Adaptor clips. 5. Gently push the Monitor Bracket against the adaptor clips and slide down until the Monitor Bracket locks in place. 6. Now connect the Monitor Bracket to the Monitor and screw it into place. 7. Position the Bracket Suction Cup to a suitable location on the windscreen ensuring it doesn’t obstruct the view of the driver. 8.
Installation - Sensors 1. Remove the Sensor Cap by rotating the cap anti-clockwise then insert the 3V Lithium Battery (CR1632) like shown below. Note: Positive (+) of battery should be facing up. CR1632 Lithium 3V + (1) 1 If the Monitor and Relay are both powered up, as soon as the battery is inserted into the sensor, you will hear the monitor beep and you’ll see the sensor come online. It will also be flashing ‘P.L’ and ‘0’.
Installation - Sensors Continued.. Before fitting the sensors to the wheels, it’s important that you know where each sensor should go. The Diagram below shows the layout and sensor positions for the maximum 34 Wheel setup. For all other configuarations, start from the top (Front) and go from left to right. Example 4 Wheel: Front Left Wheel (1), Front Right Wheel (2), Rear Left Wheel (3), Rear Right Wheel (4).
Installation - Sensors Continued.. Visually inspect your tyre’s valves for any damage or defects before fitting the sensors to ensure that further damage doesn’t occur. If you do notice that something is not right with your valves, have them checked by a tyre professional. INSTALLATION 1. After removing the original valve caps, slide the SecureFit fixing ring over the valve stem with the flat surface towards the wheel. 2.
Monitor Switch & Buttons Button Location and Features OFF Mute Power Temperature Backlight ON Power switch When the unit is first switched on, the Monitor will show all sensors offline until it connects to and receives an update from the relay.
Monitor Switch & Buttons Continued.. Mute When the alarm is sounding for low pressure, high pressure or high temperature, simply press this button once and this will silence / mute the sound until another warning alarm occurs. You can also press and hold this button for 3 seconds to get into the settings menu.(Refer Page 24) Temperature Press the Temperature button once and this will display the temperature of each tyre for 10 seconds.
Monitor Switch & Buttons Continued.. z Backlight z Switch between screen views Press and hold the Backlight button for 3 seconds to turn the Backlight OFF. Press and hold for 3 seconds to turn it back ON. 128 128 128 128 128 128 128 128 128 128 128 128 128 128 128 128 128 128 128 128 128 128 PSI H A B C Due to the size of the display, the monitor can only display the first 2 Relays on the home screen.
TPMS Settings Menu To access the Main Settings Menu, press and hold the Mute Button for 3 seconds or until the Menu Screen appears. From this Menu you can access the following settings: MAIN MENU OPTIONS A) Unit Setting - Pressure (PSI/KPA/BAR/KgCm) - Temperature (°C / °F). B) Threshold of Alarm - Set Low & High Pressure / High Temperature. C) Type of Vehicle - Set Wheel Layout for each Relay. D) Add new Relay (Reset/Synch Relay) - Program New or Reset Relay/s.
Unit Settings The Tyredog TD-2300A can be set up to display the following Pressure and Temperature units. Pressure - PSI / KPA / BAR / KgCm Temperature - °C / °F The unit is defaulted to display Pressure in PSI and Temperature in °C. If you wish to change this, please follow these steps below. 1) Press and hold the Mute Button for 3 seconds or until the Menu Screen appears like shown below then Press the Backlight Button to enter Unit Settings.
Threshold Settings In the Threshold of Alarm settings menu, you can set the following values. Low Pressure Alarm - Set value for Low Pressure Alarm Warning High Pressure Alarm - Set value for High Pressure Alarm Warning High Temperature Alarm - Set value for High Temperature Alarm Warning These settings can either be applied per axle or for all tyres at once. If you wish to change any Threshold settings, please refer below. 1) Press and hold the Mute Button for 3 seconds or until the Menu Screen appears.
Threshold Setting Continued.. To set the same Low Pressure, High Pressure and High Temperature values for all Tyres at once, while you’re in Threshold of Alarm menu, press and hold the Backlight Button for 3 Seconds or until the display shows ALL TIRES like below then refer to step #2 on page #26. 100 PSI Once you have finished setting all the values for each axle or for all Tyres at once, you will then be prompted to save these values to the Relay.
Type of Vehicle (Wheel Layouts) The Type of Vehicle settings menu allows you to choose your Vehicle Type / Wheel Layout configuration according to your application. The TD-2300A-X Series supports up to 34 Wheels and 3 x Relays. Refer to Page #30 for all available Wheel Layout Configurations. To change your Type of Vehicle / Wheel Layout, please refer below. 1) Press and hold the Mute Button for 3 seconds or until the Menu Screen appears.
Type of Vehicle (Wheel Layouts) Continued.. Press the Backlight Button to continue. (If Trailer 1 Relay (B) is set to NO. 1 NONE, pressing the Backlight button will take you back to Main menu. (Now refer to step #3 below) If you do select a Wheel Layout for Trailer 1 Relay (B), once you Press the Backlight button, it will give you the option to configure Trailer 2 Relay (C). Trailer 2 Relay (C) - Use the Mute and Temperature Buttons to change the Wheel Layout for Trailer 2 Relay (C).
Type of Vehicle (Wheel Layouts) Continued.. TD-2300A-X Series Car/Truck & Trailer Wheel Layout Options No.1 No.2 No.3 No.4 No.5 No.6 No.1 No.2 No.3 No.4 No.5 No.6 No.8 No.9 No.10 No.11 No.12 No.14 No.15 Truck Head Relay (A) Trailer 1 Relay (B) NONE No.7 AND Trailer 2 No.13 Relay (C) TIPS: If you ever change the Type of Vehicle (Wheel Layout), you may have re-enter all your Threshold settings.
Add new Relay (Reset Relay) The Add new Relay function can be used for the following situations: 1) Adding new Relays to your system. 2) Resetting / Re-programming your existing Relay. 3) Save new Wheel Layout settings to each Relay. Before you proceed any further please make sure your Type of Vehicle (Wheel Layout) is set up correctly (refer pages #28 - #30) as the procedure shown below will save these Wheel Layouts to the Relay/s.
Add new Relay (Reset Relay) Continued.. 2) To program a New Relay, Reset a Relay or Save new Wheel Layouts to a Relay, firstly make sure the Display shows the correct Relay Location. Use the Mute Button to select between Truck Head Relay (A), Trailer 1 Relay (B) or Trailer 2 Relay (C). If your Type of Vehicle (Wheel Layout) only consists of 1 Relay then you will only have the option to Program / Reset / Save new settings to the Truck Head Relay (A).
Add new Sensor (LEARNABLE) In the Add new Sensor menu, you can program new / replacement LEARNABLE sensors. You cannot re-program old sensors back in or sensors from another TD2300A-X Series Kit. They must be LEARNABLE type sensors only. Replacement LEARNABLE sensors can be purchased through your authorised Tyredog Dealer or online at www.tyredog.com.au. When ordering replacement LEARNABLE sensors, you must order the correct wheel position.
Add new Sensor (LEARNABLE) Continued.. Once you have your new LEARNABLE replacement sensor, please follow the steps below. Note: The Relay must have power and the Monitor must be within range of the Relay otherwise the procedure below will not work. 1) Press and hold the Mute Button for 3 seconds or until the Menu Screen appears. Use the Mute Button to select Add new Sensor Menu then press the Backlight Button to enter Add new Sensor Settings.
Add new Sensor (LEARNABLE) Continued.. 3) While the Red LED on the Relay is still illuminated, insert a Battery into the LEARNABLE sensor like shown below. Once you insert the Battery, the monitor will Beep once. Now Press the Reset Button again on the relay and make sure the Red LED turns OFF and this will complete the Learning Process. Note: If the LED on the Relay turns off before you have a chance to insert the Battery into the Sensor, simply press the Reset button on the Relay again.
How to use your TPMS system When you first switch on your TPMS system, the screen will look similiar to the example shown below. (Depending on your Type of Vehicle (Wheel Layout)). Typical Start-up screen when first switched on ‘H’ Means the display is showing the Truck Head & Trailer 1 Relay Layout. 128 128 128 128 128 128 128 128 128 128 128 H A B C 128 128 128 128 128 128 128 128 128 128 128 PSI This Tyre Symbol means the Sensor is Offline.
How to use your TPMS system Continued.. Now you know what the screen should look like when the Relay/s are connected and Sensors are Online, please refer below so you can understand how all the warnings work. 1) Low Pressure Warning / Indication (Example when Low Pressure Threshold is set to 100 PSI) If the Tyre Pressure drops below your Low Pressure Threshold setting, the Monitor will start Beeping and the affected wheel position will Flash between the actual Tyre pressure reading and P.L. (P.L.
How to use your TPMS system Continued.. 2) High Pressure Warning / Indication (Example when High Pressure Threshold is set to 140 PSI) If the Tyre Pressure raises above your High Pressure Threshold setting, the Monitor will start Beeping and the affected wheel position will Flash between the actual Tyre pressure reading and P.H. (P.H. meaning Pressure High). The Tyre symbol on the Monitor will also change to indicate the Tyre Pressure is to High.
How to use your TPMS system Continued.. 3) High Temperature Warning / Indication (Example when High Temperature Threshold is set to 70 deg C) If the Tyre Temperature raises above your High Temperature Threshold setting, the Monitor will start Beeping and the affected wheel position will Flash between the actual Tyre pressure reading and T.H. (T.H. meaning Temperature High). The Tyre symbol on the Monitor will also change to indicate the Tyre Temperature is to High.
How to use your TPMS system Continued.. 4) Low Battery Warning / Indication The TD-23000A Monitor will warn you when the Batteries in the Sensors, Relay and Monitor are getting low. Refer to Examples below. 128 128 128 128 128 128 128 128 128 128 128 H A B C 128 128 128 128 128 128 128 128 128 128 128 PSI Example Truck Head Relay (A) Low Battery Warning. Will Flash Between ‘ ’ and ‘ ’.
TroubleShooting Here we have listed some possible questions or scenarios you may encounter with your TPMS system. 1) One or More Sensors will not come online. 128 128 128 128 128 128 128 128 128 128 128 128 128 128 128 128 128 128 128 128 128 128 PSI H A B C Example Shows Sensor 1 is Offline What can I do? Most of the time if a sensor doesn’t come online it’s usually due to a Low Battery problem. To check this you can try a new Battery (CR1632 3V).
TroubleShooting Continued.. 2) All Sensors from 1 of the Relays are Offline / Relay Offline. 128 128 128 128 128 128 128 128 128 128 128 128 128 128 128 128 128 128 128 128 128 128 PSI H A B C Example Shows all Sensors from 1 Relay are Offline What can I do? If All of your sensors from 1 Relay are Offline, this generally means that the Relay hasn’t connected to the Monitor. (Relay has no Power) This can be determined by checking the Relay status Symbol.
TroubleShooting Continued.. 3) Sensor is Online but is not Reading Pressure What can I do? Firstly make sure the Sensor is screwed on properly. If it’s not screwed on enough to open the valve then it cannot read pressure. You can then try fitting the sensor to another Tyre to see whether it’s a Sensor problem or Valve problem. If the sensor still doesn’t read pressure on another Tyre, please try a new Battery (CR1632 3V).
TroubleShooting Continued.. 5) Wheel Layout keeps defaulting back to the old Wheel Layout What can I do? If you ever change the Wheel Layout configuration in the Type of vehicle menu, you must reset /save these new layouts to the Relay/s. Refer Page #31. 6) I can’t Program / Add a new Sensor What can I do? To program new Sensors, they must be a LEARNABLE TD-SN-2300A-X type Sensor only. Please refer to Pages #33 - #35 and make sure the full procedure was followed.
TroubleShooting Continued.. 9) Can I upgrade my TD-2300A-X system? What can I do? Yes you can. Example: If you have a 6 Wheel TD-2300A-X system you can convert it to a 10 Wheel system by ordering LEARNABLE sensors 7,8,9,10 and programming them in using the Add new Sensor Menu. You can also add up to 2 additional Relay Kits (Trailer Kits). The TD-2300A-X can support up to 3 Relays and can monitor 4 to 34 Wheels.
Product package content Monitor Items Content TD-2300A-X Quantity 1 piece LCD Monitor AA 1.5V battery 2 pieces User guide 1 piece Suction cup bracket 1 set holder Fixed lock ring 1 piece Holder arm base 1 piece Monitor holder 1 piece Cigarette power cord 1 piece 46 TD-2300A Series V1.
Relay kit Type Item Item photo X04 X06 X08 X10 X12 Unit Relay 1 1 1 1 1 4 6 8 10 12 piece 4 6 8 10 12 Hex socket screw 4 6 8 10 12 piece SecureFit Ring 4 6 8 10 12 piece Allen Key 1 1 1 1 1 piece AA 1.5V battery for relay 4 4 4 4 4 piece TD-SN2300A-X Sensors CR 1632 battery for sensors + 47 set piece TD-2300A Series V1.
Relay hardwire harness 1 1 1 1 1 piece Relay Mounting Bracket 1 1 1 1 1 piece 4mm screw 2 2 2 2 2 piece Relay Cover 1 1 1 1 1 piece 10 12 Optional Accessories 3 way adaptor 4 48 6 8 Set TD-2300A Series V1.
Product specification Sensor Specifications Frequency 433.92MHz Pressure range 0-180 PSI Accuracy Pressure：±3 PSI, Temp：±2 Degrees Celsius Operating voltage 3 Volts DC (Lithium CR1632 3V) Operating temperature -40~125 Degrees Celsius Operating humidity 100% Battery life 6 or up to 12 Months (Depending on operation time) Dimensions 20.5mm Diameter X 20mm Height Weight 10 g (±1) Relay Specifications Frequency 433.
Monitor Specifications Frequency 433.92MHz Operating voltage 12 / 24V DC Only (External) Operating temperature -20~70 Degrees Celsius Dimensions 102mm (L) X 72mm (W) X 29mm (H) Weight 143 g Specifications are correct at time of publication. Subject to change without notice. 50 TD-2300A Series V1.
1 Year Warranty Zylux Distribution Pty. Ltd. warrants to the Customer that this product is substantially free from defects in materials and workmanship under normal use for a period of 1 Year from the Date of Purchase (Excl. Batteries) when Purchased through an Australian / New Zealand Authorised Dealer / Retailer. Please ensure you keep a copy of your receipt on file as this will be required for proof of purchase and to validate your warranty.
1 Year Warranty Continued.. Repairing / Replacing Faulty Products under Warranty Products presented for repair may be replaced by refurbished products of the same type rather than being repaired. Refurbished parts may be used to repair the products. Replacement of the product or a part does not extend or restart the Warranty Term.
- BLANK -
