INDEX Precautions ....................................................................... 4 The Main Purpose ............................................................. 5 The Feature of TYREDOG TD1400A-X .............................. 7 INSTALLATION .................................................................................7 MANAGEMENT .................................................................................8 RELIABILITY AND ROBUST.............................................................
Operating instructions ..................................................... 24 MONITOR BASIC FUNCTION .............................................................. 24 THE SCREEN CONTENT AND BASIC OPERATION ................................... 24 MUTE ............................................................................................. 24 TIRE TEMPERATURE/ SPARE TIRE PRESSURE AND TEMPERATURE.................... 25 SETTING MODE .........................................................................
CAR BATTERY LOW POWER ................................................................... 37 SENSOR RUNS OUT OF BATTERY SENSOR POWER SHORTAGES ....................... 38 THE DEFINITION OF WARNINGS ...................................................... 38 Additional information ................................................... 39 Trouble shooting.............................................................. 40 Product package content ...............................................
Precautions 1. Please do not operate this device during drive. 2. Due to rubber valve stem aging under high temperature and expose under the sun, which may cause crack on the rubber stem, therefore, we recommended metal type of valve stem. 3. Please choose the installation location carefully so that the TFT monitor will not interfere driver when driving. i. Please make sure TFT monitor firmly fixed to the front windshield or dashboard. ii.
with other signals. 10. Many environmental factors cause tire pressure rise and down as well. For example, hot weather or warm tire will lead rising tire pressure. 11. It is natural that tire pressure will decrease by days but not caused by the installation of tire pressure monitoring system. Tyredog TPMS can response with its real figure of pressure. 12. Please don’t mix your sensor with other systems’, as each system has its separate unique identified number of sensor, or the mixed sensor won’t activate.
Multi-wheel trucks cause time consuming in human inspection in tire pressure. Goes without saying that no chance to monitor tire pressure when running. The system can have a very clear picture of tire pressure status among all tires. Not adds much maintenance cost Advanced designs to give the best convenience to all drivers by wireless/ cordless design, external sensors, etc.
The Feature of TYREDOG TD1400A-X TYREDOG TPMS (Tire Pressure Monitoring System) - Powerful tool for maximizing uptime and improving safety - The New WTPMS StandardTYREDOG Tire Pressure/ Temperature Monitoring Solutions. TYREDOG is a leading WTPMS solution for from the light to heavy-duty trucking industry. By continuing to develop new and better TPMS designs and manufacturing technologies, TYREDOG has helped the automotive industry improve safety issues and reduce operational costs.
battery low indicators on the monitor can remind driver of battery power status in four tires. Light and compact sensor: extremely lightweight and compact with specially designed electronic sensors. Management Graphic user interface: Powerful graphical user interface for rapid understandings of tire status. Real-time: high accuracy, real-time monitoring tire pressure and temperature and accuracy achieve 1 PSI. difference. Adjustable: fully adjustable pressure and temperature warning range.
Location of controls and outlook Monitor description Antenna Battery cover TFT Monitor Bracket Slide Mute Temperature Connect to cigarette adapter Set Front of Monitor Back of Monitor Monitor bracket description Monitor holder Fixed lock ring Holder arm base Suction cup control arm Sensor battery cover Bracket stand Monitor Bracket Valve stem connection Sensor 9 V1.
Graphic user interface description Monitor status : ：Normal Pressure measuring unit： ： ：Low pressure alert ：High pressure alert ：High temperature alert ：Low battery Car battery power status Unit : Voltage ：Learning mode Sensor status : Temperature measuring unit： ： ：Centigrade ：Data not received ：Data received ：Low pressure ：Fahrenheit ：High pressure ：High temperature ：Low battery Notes: 1. Spare tire functions does not exist under the standard four-wheel mode. 2.
process. (The manual is based on 5 wheels display to illustrate.) Getting started System map TD1400A-X Installation TD1400A-X use 2 x AAA batteries as main power source, it can also plug into car 12V power supply. If using the 2 x AAA batteries and 12 V car power supply at the same time, this can extend the AAA battery life, and this will keep the display continue to show tire pressure status. Installation Procedure 1. Insert batteries into monitor. 2. Insert batteries into sensors. 3.
The installation of TFT monitor Battery as power source A. Please prepare AAA 1.5V battery which is provided in product package as well. B. Open the battery compartment cover. Press the battery cover（As shown arrow A）,Remove the battery cover（As shown arrow B） A B C. Insert the battery 12 V1.
Insert the end with battery contacts and insert the battery until it locks in place. Note: make sure battery polarity correct when insert it. D. Close the cover Press the cover until snaps shuts. Power on monitor When the battery is installed, the receiver will automatically boot, and receive sensor status, also display on the screen. At the beginning the display will show the previous record until new data is received. The booting-up screen is as picture below： 13 V1.
Note： 1. When batteries are exhausted soon, the battery level will be displayed. Please refer coming explanation. 2. Before you are going to next step, please make sure switching on your display first. 3. Make sure battery polarity correct when insert it. 4. The system is designed for the convenience of user. Therefore, user doesn’t need to switch off monitor and we even suggest that user should keep the monitor power on all the time.
The installation of tire pressure sensors As each sensor has its own position, you have to make sure its pre-set position. When inserting batteries in every sensors please don’t mix up sensor caps and every sensors have own positions and sensors map could give guidance for user to install. Here is sensor map. (1) (2) (3) (4) (5) (1) means “ Front Left Tire ”. (2) means “ Front Rear Tire”. (3) means “ Rear Left Tire ” (4) means “ Rear Right Tire ”. (5) This is symbol for a spare tire. Note： 1.
Insert batteries in sensors Battery installation for tire pressure sensor A. Take away sensor cap in anti-clockwise direction. B. Insert lithium battery and make sure battery polarity correct when insert it. Right now, monitor will receive signals from corresponding sensors and report pressure value on the screen. At first, you will find that the value shows “00.0”. It is because sensors have not been mounted yet. The screen could show as below： 16 V1.
change Take 3rd sensor for example Note： After take away battery, the status of being without battery need to leave for 10 seconds and then insert battery again. It is for resetting system. C. Fit sensor cap in a clockwise direction. Please refer to “sensor map” to make sure the right position of each sensor and please don’t mix up sensor caps either. You will find either sensor cap and sensor body have marks to remind user of its position. 17 V1.
Take 1st for example Anti-theft tool for sensor (Optional) Anti–theft tool is designed to prevent the possibility of sensors being taken away. Users can decide if it is needed or not. Valve Hex socket Screw Anti-theft fixed ring Sensor A. Put anti-theft fixed ring onto valve stem. (Before installed sensor , please make sure the valve stem is properly clean, so there is no affect during tire pressure measurements.) 18 V1.
B. Install sensors onto valve stem. Don’t install sensors by brute force Now, the display will show you the latest valve of tire pressure. Take 3rd for example C. Adjust the anti-theft fixed ring position to install it with sensor in place firmly. 19 V1.
D. Put the hex socket screw onto the anti-theft fixed ring. (Please don’t exert excessively to damage the valve.) E. When four tire pressure sensors are installed, please check with detergent water if the tire pressure sensors and tire valve is completely fitted without any air leakage. (spread detergent water on the valve stem) The anti-theft tool can be decided to install or not. If not, step A, C and D could be just skipped. 20 V1.
Mount the TFT monitor to the front windshield or dashboard TFT monitor bracket installation E D A B C Holder installation guide A. Place the fixed lock ring under bracket stand. B. Insert the holder arm base on top of the plastic ball base. C. Adjust the proper position and tighten the fixed lock ring. D. Place the mortise of holder arm base into the slot of monitor of holder. E. Press the monitor holder until heard click sound. Installation completion 21 V1.
Mount TFT monitor to bracket A. Mounting the monitor into the holder until heard 'click sound'. B. Mount the TFT monitor to the front windshield or dashboard. Note： Be careful not to splash juice or other soft drinks onto the TFT monitor. Before fix bracket, chosen flat and clean surface is necessarily for better hold of bracket. To keep the screen clean, do not touch the surface. Handle the display unit by its edge. Monitor should keep standing-up vertically.
Optional – car lighter power cord Another option for use is by connecting to car lighter adapter and battery will not be needed. A. Connecting lighter power cord to monitor. B. Connecting power cord to car lighter adapter as well. Note： Used a car cigarette lighter power cord for power, the monitor and backlight will remain turn on position at all time. 23 V1.
Operating instructions Monitor basic function Location of function buttons Mute Temperature Set The screen content and basic operation Mute Silent mode switch, when the tire pressure and temperature anomalies, the abnormal situation will be displayed on the TFT screen and there will be a "Don" Don " Don " with 5 times sound the alert. Soft reduction press mute button can be back to normal function. 24 V1.
(This reference icon is high pressure warning, tire pressure values may be different) Tire temperature/ Spare tire pressure and temperature Press with care , on the TFT screen will display the temperature of the four tires wait after 10 seconds, and then show the spare tire's temperature and pressure for 10 seconds, and return to the normal display status. Change to tire temperature 25 V1.
Setting Mode When press setting button for about one second will show setting mode like below. In this mode temperature button set option button, can choose pressure and temperature unit or pressure and temperature’s warning range setting. Setting button set to enter option button ,mute button set to quit button. Setting button and temperature button each set to adjust the value of function button in the warning range. If in setting mode idle for 15 seconds will change to normal display mode.
Warning range setting : Low tire pressure setting : High tire pressure setting : High tire temperature pressure Low tire pressure warning High tire pressure warning High tire temperature warning (default value=26PSI) (default value=45PSI) (default value=70 ) Repeat the rear tire Temperature and pressure setting. Repeat the spare tire Temperature and pressure setting. (Under the 4 wheel mode this function does not exist.) 27 V1.
Pressure unit setting Pressure unit setting Temperature unit setting Temperature unit setting Learning mode When you need to replace any of existing sensors with learnable sensor, you will need this function. Normally, original sensor has its own identified number and you won’t need to do anything with sensors. However, whenever you lost your original sensor or sensor is broken, you will need to purchase a new ‘learnable sensor’ to replace.
Change to learning mode 3rd wheel position as sample Install battery to learning sensor ,sensor ‘s wheel position pressure value will show pressure value ,monitor will be accompanied by ‘beep’sound to complete learning setting.As the photo below： Note：This function only provide to learning sensor, standard sensor can’t be re-learning. 29 V1.
Activate the spare tire function The main features of this function is to switch display from 4 wheel display to 5 wheels display. Press the Set button to enter setting mode then press the backlight button again for 8 seconds the display will switch from 4 wheel display to 5 wheels display. When pressing setting button to enter setting mode, please choose enter learning mode, let system recognize fifth sensor. After exit learning mode back to normal display mode ,TFT monitor will have spare tire icon.
Operating Procedure Initialization After booting the system , monitor will enter boot screen. It will began to detect the host power supply first, and wait for the sensor transmit tire pressure and temperature values, this is initial state. The screen displays pressure and temperature values are before shutdown value. Once receive ,will display current pressure and temperature values on the screen. Without any abnormality ,it will enter to normal display state.
value. After all sensors connected with monitor will change default value color and sensor state icon. Sensor connected with monitor is normal, if there don’t have any warning means monitor and sensor power enough and tire pressure and tire temperature all in standard value. After 5 wheel connect with monitor (Refer icon, tire pressure default value maybe different) Standby mode After turn on ,if more than 10 seconds do not press any button, monitor will automatically enter standby mode.
Press temperature button Backlight turn on normal state Beginning display Monitor into standby mode 啟顯示狀態 (Refer icon, tire pressure default value maybe different) If you want to wake up monitor , press temperature button. At this time monitor backlight will turn on and back to normal state. shown above right picture.
Take 3rd for example If tire pressure keeps dropping, every one PSI lower, it will warn again. The situation will be stopped, when tire pressure is back to standard value. Note：Strongly suggest that as long as low tire pressure warning is on, check tire situation first to ensure safety.
Take 3rd for example If tire pressure keeps on rising, every one PSI higher, it warns again. The situation will be stopped, when tire pressure is back to standard value. Note： Strongly suggest that as long as low tire pressure warning is on, check tire situation first to ensure safety.
change to tire tempersture display Take 3rd for example If tire temperature keeps on rising, every one higher, it warns again. The situation will be cleared, when tire temperature is back to standard value. Note： Strongly suggest that as long as high tire temperature warning is on, check tire situation first to ensure safety. Note：If tire pressure and temperature are not match with standard value at same time, monitor will give priority to high temperature warning icon displayed.
Monitor runs out of power Battery power in monitor will decrease by daily operation and when power level is lower to some extent, battery low indicator in TFT monitor will appear to remind driver of time to replace battery. The icon is shown as picture below. Please change monitor battery as early as possible to make sure system function well.
Sensor runs out of battery sensor power shortages Battery power in sensor will decrease by daily operation and when power level is lower to some extent, the sensor battery low indicator will appear to remind driver of time to replace battery. The icon is shown as picture below. Please change sensor battery as early as possible to make sure system function well. The definition of warnings Item 1.
、 upper warning value 4. icon ，continue ten times warning sound High tire pressure When tire pressure is Five times “Don” sounds continuing rise by already over upper and continue display one PSI. warning value, warning 、 icon, continue will be given by every one ten times warning sound PSI. lower. 5. When tire To remind driver of high temperature is tire temperature higher than upper Five times “Don” sounds 、 、 icon, continue ten times warning sound warning value Learning mode 6.
Battery may explode if mistreated. Be sure to observe the correct polarity when installing the battery. Trouble shooting The following checklist will help you remedy problems you may encounter with your unit. Before going through the checklist below, check the connection and operating procedures. 1. Indications disappear from / do not appear in the display A. Please make sure if monitor has battery inserted. B. Be sure the power of battery is enough. C.
A. Please make sure if sensors are in a configured distance. This system, TD1400A-X, should be applied in passenger car. If installed in other kind of vehicle, the system doesn’t guarantee its functionality. B. Please make sure if sensor has battery inserted. C. Be sure to sensor the correct polarity when installing the batteries. D. Battery has no power after use for a long time. Battery could run out of power and we suggest to replace with new battery. E.
purpose. You can simply slightly shock monitor or press any of buttons to wake it up. 5. After monitor boot up, no connection icon When sensor have more than 1 PSI changes, will send new pressure and temperature .Therefore temporary do not have connected icon. 6. Please make sure the surface of glass is clean and flat to give the best fitness to monitor bracket. Otherwise, the monitor could drop off. Tire pressure will be always changing by many environmental factors. 7.
CR1632 Lithium Battery AAA-1.5V Battery 5 pieces pieces 2 2 pieces pieces 1 piece 1 piece User guide Spanner Anti-theft tool 1 piece 1 piece Anti-theft 4 5 fixed ring pieces pieces 4 5 pieces pieces Hex socket screw 1 piece 1 piece Monitor holder Suction 4 Cup 1 piece 1 piece Bracket Holder 1 piece 1 piece Holder arm base 43 V1.
1 piece 1 piece Fixed lock ring Cigarette power 1 piece 1 piece cord Product specification Sensor specification Frequency 433.92MHz Pressure range 0 ~ 60PSI Accuracy Tire pressure ±1PSI、temperature ±2 Operating voltage 3 Volts DC Operating temperature -40 ~125 Battery life 1-2 years (depends on working hours per day) Dimensions Diameter 20.5mm X height 20mm Weight 10g (±1) Monitor specification Frequency Operating voltage Battery life 433.
Weight 60g 45 V1.
