User Guide

Typhoon
Wireless Multimedia Set Article Number: #40353
Version 2.0 All specifications and information are subject to changes without further notices.
2
2-2. Select the Channels for the Keyboard and the Mouse
a) Select Channel “1” or “2” for the Keyboard and the use the next available number for the
Mouse. Do not select the same channel as the Keyboard.
b) Put the batteries into the battery compartments of both the Keyboard and the Mouse.
2-3. Link the Design Wireless Keyboard and the
Wireless Optical Mouse with the Receiver
(Synchronization)
a) The locations of the channel link
button and the LED indicator may
differ with different model versions.
b) Please turn on your PC. The LED
indicator on the receiver will light.
c) Press the ID Link Button on the receiver and the LED indicator will blink. The receiver is
ready to automatically link (synchronize) with the keyboard and the mouse.
d) Next press the ID Link Button at the back of the keyboard under the flipper leg. The LED
light on the receiver will blink quickly when you have successfully completed the keyboard
linkage.
e) Then press the ID Link Button at the back of the mouse beside the label.
f) The LED indicator on the receiver will light steadily while you have completed the linkage
(synchronization process).
g) The LED indicator of the receiver will blink when the keyboard or the mouse are in use.