Datasheet

TYPHOON MP3 PLAYER ENJOY
Article number: 84209 / 84210 / 84211
All specifications and information are subject to changes without further notices 13
6. Power Set menu
i. Allows you to set the battery energy savings function of the
MP3 Player. The duration set allows the MP3 player to turn off
itself in the assigned period during inactivity.
ii. Press Menu button to access this function.
iii. Press either
or buttons to select between Disable / 1 Min. / 2 Minutes / 5
Minutes / 10 Minutes.
iv. Select Disable and the MP3 player will remain powered.
7. Backlight menu
i. Allows you to set the period for the backlight to remain on. This also allows you to
conserve battery power.
ii. Press either
or buttons to adjust the duration for the
backlight to stay on from 0 to 60 seconds.
8. Record Set menu
i. Allows you to set the recording properties for the Voice recording function.
ii. Press Menu button to access this setup.
iii. Press either
or buttons to scroll among the recording setups: Source / Encoder /
Channel / Device / Sample / Bit Rate / Mode.
iv. Source – this is default to “Microphone” and not selectable.
v. Encoder – IMADPCM / MSADPCM / PCM.
vi. Channel – this is default to “Monophonic” and not selectable.
vii. Device – this is default to “INT” and not selectable.
viii. Sample Rate – 8000Hz /11025Hz / 16000Hz / 22050Hz /
32000Hz / 44100Hz / 48000Hz.
ix. Bit Rate – Not selectable (depend on previous setting and model type).
x. Mode – Not selectable and default to “Song”.
9. About Menu
i. This allows you to check on the firmware version, internal memory size and the
amount of free memory size available on the MP3 player.
ii. Press Menu button to access this information display.
iii. The display will then automatic scroll the information through the screen.