Installation & Operation Manual Thermostat QuickStatTM

Vérification de la sonde de température
Si la sonde est déconnectée ou en court-circuit, le système de chauffage
ne fonctionnera pas. L’état de la sonde peut être vérifié en mesurant sa
résistance conformément au tableau ci-dessous.
Codes d’erreur
E0 : Erreur interne. Le thermostat doit être remplacé.
E2 : Sonde externe en court-circuit ou déconnecté.
Sonde
Temp (˚C) Temp (˚F) Valeur (ohm)
–10 –14 64000
0 32 38000
10 50 23300
20 68 14800
30 86 9700
12
6
Important
:
All information, including illustrations, is believed to be reliable.
Users, however, should independently evaluate the suitability of each product for
their particular application. Tyco Thermal Controls makes no warranties as to the
accuracy or completeness of the information, and disclaims any liability regarding
its use. Tyco Thermal Controls' only obligations are those in the Tyco Thermal
Controls Standard Terms and Conditions of Sale for this product, and in no case
will Tyco Thermal Controls or its distributors be liable for any incidental, indirect,
or consequential damages arising from the sale, resale, use, or misuse of the
product. Specications are subject to change without notice. In addition, Tyco
Thermal Controls reserves the right to make changes—without notication to
Buyer—to processing or materials that do not aect compliance with any applica-
ble specication.
Warmzone
2056 South 1100 East
Salt Lake City, UT 84106
Tel [phone]
Fax [phone]
[e-mail]
www.warmzone.com