User Guide

8 Port Ethernet Smart Switch With Fibre Uplink
Tyco Electronics Page 2
Features
 8 Auto-sensing 10/100Base-T RJ-45 Ethernet ports
 1 Fibre Uplink Port (100Base-FX Format)
 Full auto-MDI/MDI-X on all Ethernet copper ports
removes the need for cross-over cables
 Meets IEEE 802.3, .3u and .3x Ethernet standards
 Uses store-and-forward switching to separate collision
domains and provide abnormal packet filtering
 Console port enables basic management of the switch
 Supports up to 7 port based VLANs
 Integral 4K MAC address table automatic learning
 Large 2Mb packet buffer
 Very high backplane bandwidth
 Supports back-pressure & flow control
 Numerous diagnostic LED indicators
 Very compact, stand-alone or 10” rack mounting
 Optional 19” rack mounting
 FCC Class A and CE mark certification
Technical Support and Service
If you require technical advice for these products, please see the
FAQ pages on the web address http://www.lan-electronics.com
If you still have problems, please contact us using the support form
located on the above web site.
If you have a faulty unit then please contact us through the web
site to arrange for a replacement unit. The faulty unit must be
returned to us as part of the replacement agreement.