Operator's Manual

MM101332V1, Rev. K
Table 10-1: Menu Item Information
FEATURE DISPLAY PARAMETER
SETTING
COMMENT
Keypad Lock Menu Item:
KEY LOCK
Locked
Unlocked
Locks the keypad. To unlock; press and
release “M” then within 1 second press the
option button (NOTE: this sequence is also
a short cut to locking the keypad.)
Once Selected:
LOCKED
Backlight Adjust Menu Item:
BCK LIGHT
Once Selected:
BCKL=
OFF/ON Selects the light level for backlighting.
Contrast Adjust Menu Item:
CONTRAST
Once Selected:
CNTRST=
1, 2, 3, 4 Selects the display contrast level.
Transmit Power Select Menu Item:
TX POWER
Once Selected:
POWER=
HIGH or LOW Selects radio output power mode.
Radio Revision Information Menu Item:
REVISION
N/A Selects the information display to view.
Informational display only (see
Figure 10-3).
No user selectable settings.
Toggle Scan On/Off SCAN ON/OFF Toggles Scan operation ON/OFF.
Toggle Private Mode PRIVATE ON/OFF Toggles Private Mode ON/OFF.
Display Current Encryption Key DISP KEY N/A Displays current encryption key.
Informational display only. No selectable
settings.
Display Current Home
Group/Channel
HOME N/A Selects Home Group/Channel
Select Desired System SYS SEL N/A Selects a new system.
Add Group/Channel to Scan List SCAN ADD N/A Adds to Scan List.
Delete Group/Channel SCAN DEL N/A Deletes Group or Channel from Scan List.
Add/Delete Scan List SCAN A/D N/A Add or Delete from Scan List.
Select Telephone Numbers From
Phone List
PHN CALL N/A Trunked Only.
Data Operation NO DATA ON/OFF Trunked Only. Toggles Data Operation
ON/OFF.
Select Individual Call from IC List IND CALL N/A Trunked Only.
Select Group GRP SEL N/A Trunked Only.
Talkaround TALKARND ON/OFF Conventional Only. Toggles Talkaround
feature ON/OFF.
Select Channel CHN SEL N/A Conventional Only.
Feature Encryption Display Menu Item:
FEATURES
Once Selected:
(See Feature
Encryption Display
Section)
N/A Indicates current features programmed into
the radio as well as certain information
required to add features to the radio.
Informational display only. No user
selectable settings.
System Scan Enable Menu Item:
SYS SCAN
ON/OFF Toggles System Scan feature ON/OFF.
Once Selected:
SYSC ON or
SYSC OFF
36