Operator's Manual

MM101332V1, Rev. K

9 CONVENTIONAL OPERATION

In addition to the features covered in the following BASIC OPERATION section, the following functions

are for the conventional mode. The radio functions in the conventional mode when using conventional

communications channels (non-trunked).

9.1 RECEIVING A CALL

1. Select desired conventional system and channel or turn scan ON and make sure desired channel is in

scan list.

2. When the radio receives a call, the radio will unmute and the channel name will appear in the display.

9.2 SENDING A CALL

1. Select desired system and channel.

2. Ensure the channel is not busy by pressing the Clear/Monitor button momentarily. If audio is heard

or if the

icon is on, the channel is busy.

3. When sure that the channel is not busy, press the Push-To-Talk button and speak into the microphone.