Operator's Manual

MM101332V1, Rev. K
Figure 8-9: Tri-Color LED
8.2.2 Tri-Color LED
The Tri-Color LED changes color to indicate radio status and is visible from both the front and top of the
radio (see
Figure 8-9). The three colors of the LED and the status they represent are:
Green: Receiving
Red: Unencrypted transmission
Orange: Encrypted transmission
8.2.3 Status Messages
During radio operation, various radio Status Messages can be displayed. The messages are described
below.
MESSAGE NAME DESCRIPTION
QUEUED Call Queued
Trunked mode only. Indicates the system has
placed the call in a request queue.
SYS BUSY System Busy
Trunked mode only. Indicates the system is busy,
no channels are currently available, the queue is full,
or an individual call is being attempted to a radio that
is currently transmitting.
DENIED Call Denied
Trunked mode only. Indicates the radio or talkgroup
is not authorized to operate on the selected system
and/or talkgroup.
Trunked mode only. Indicates the control channel is
lost and the radio has entered the Control Channel
Scan mode to search for the control channel (usually
out of range indication).
CC SCAN Control
Channel Scan
Trunked mode only. Indicates the radio has entered
the Wide Area Scan mode to search for a new
system (if enabled through programming).
WA SCAN Wide Area
Scan
Conventional mode only. Indicates the radio is
operating on conventional channels in talkaround
mode (no repeater).
TALKARND Talkaround
SYSC ON System Scan
Features On
Trunked mode only. Indicates the System Scan
features are enabled.
26