Operator's Manual

MM101332V1, Rev. K

Table 8-1: Display Descriptions

Steady – “Busy” transmitting or receiving

Flashing – call queued

Steady – special call mode (individual or telephone)

Steady – during all radio transmissions

Steady – transmit at low power

If icon is not visible – transmit at high power

Steady – battery charge indicator (refer to Figure 8-8)

Flashing – Low battery indicator (refer to Figure 8-8)

Steady – Indicates the current channel is set up as an analog channel.

Steady – trunked system in Failsoft

™

mode

Steady – group or channel in scan list

Steady – priority 2 group or channel

Steady – priority 1 group or channel

Steady (rotates clockwise) – scan mode enabled

If icon is not visible – scan is disabled

Steady – transmit in encrypt mode

Flashing – receiving an encrypted call

Steady – Channel Guard enabled

If icon is not visible – Channel Guard is disabled

Steady – Indicates the current channel is set up as a ProVoice or Aegis

channel

Steady – Indicates the current channel is set up as a Project 25 (P25)

channel.

Figure 8-8: Battery Charge Icons (Full Cycle)

The battery icons (see

Figure 8-8) indicate approximate level only, based on battery voltage.