Operator's Manual

MM101332V1, Rev. K

8.2 DISPLAY

The radio Display is made up of 3 lines (see Figure 8-7). Lines 1 and 2 contain eight alphanumeric

character blocks and are used primarily to display system and group names. Line 1 also displays radio

status messages. The 3rd line is used primarily to display radio status icons. All three lines are used to

display menu options when in the menu mode. If programmed, the display backlighting will illuminate

upon power up or when radio controls are operated.

Figure 8-7: Radio Display

8.2.1 Radio Status Icons

Status Icons indicate the various operating characteristics of the radio. The icons show operating modes

and conditions and appear on the third line of the display (see

Table 8-1).