Operator's Manual

MM101332V1, Rev. K
Figure 8-6: System Radio Front Panel
KEY FUNCTION

Same as Scan Model.

Same as Scan Model.

Selects a specific system. If the rotary knob is used to
select the system and more than 16 systems are
programmed in the radio, the
key is used to select
additional banks (groupings) of systems.
1-9, *, 0, #
These keys are used to place telephone interconnect and
individual (unit-to-unit) calls. The keys operate like a
normal telephone keypad.

Selects a specific group.

Turns the Scan operation ON and OFF.

Enables or disables Private Mode for the
system/group/channel displayed.

Adds groups or channels from the currently selected
system to the Scan list.

Status. Access to the status list (0-9). The Status key
permits the transmission of a pre-programmed status
message to a P25 Trunked or EDACS site.

Message. Access to the message list (0-9). The Message
key permits the transmission of a pre-programmed
message to a P25 Trunked or EDACS site.

Deletes selected groups or channels of the currently
selected system from the Scan list.

Places telephone interconnect calls.

Initiates individual calls.
23