Cut Sheet

General Purpose Relays
Industrial Relays
Sockets & Accessories, KHA Relays
11-2015, Rev. 1115
www.te.com
© 2012 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
1
Potter & Brumfield
•
Sockets for 2 - 4 pole relays with solder terminals
•
Solder, PCB or screw terminal sockets
•
Choice of grounding provision on sockets
•
Hold down springs
•
Plates and brackets permit various mounting options
Approvals
UL E22575 and E59244, CSA LR15734
Technical data of approved types on request
Technical Data
Socket contact material Spring brass, tin plated
Socket body material
27E006, 27E220, 27E023, 27E007 Nylon
& 27E894
27E166 Glass-filled polyester
Maximum current 5A
Product
Code
Poles Terminal type Grounding
provision
Part
number
27E006 4 solder terminals yes 1419106-1
27E220 2 pcb terminals no 1419106-7
27E023 4 1419106-3
27E007 4 yes 1419106-2
Caution: Printed circuit sockets are manufactured with "floating" (Loose) terminals. This
permits them to align with holes in the circuit board and with the relay terminals. During
the mounting and soldering of the socket, vertical float should be eliminated and the
terminals seated on the board. (This may be accomplished by inserting a dummy relay in
the socket.) Failure to eliminate float may cause fracture of the solder joint or separation of
the copper conductor from the printed circuit board when a relay is inserted in the socket
after soldering.
.061
(1.55)
GROUND LUG
(IF SO EQUIPPED)
.171
(4.34)
.218 ± .016
(5.54 ± 0.41)
.105
(2.67)
GROUND
LUG
.052 ± .010
(1.32 ± 0.25)
.125 ± .010
(3.18 ± 0.25)
.850
(21.59)
1.150
(29.21)
1.07
(2.72)
.310
(7.87)
.068
(1.73)
.183
(4.65)
.012
(0.30)
.440
(11.18)
.160
(4.06)
14
PLACES
.070 DIA.
(1.78)
.410
(10.41)
.660
(16.76)
.175
(4.45)
.350
(8.89)
.525
(13.34)
Ordering Code
Dimensions
Sockets with PCB or solder terminals
Dimensions (continued)
Socket with pierced solder terminals
Socket with printed circuit terminals
Recommended Chassis Thickness
.031 (.79) to .062 (1.57)
1. 015
(25.78)
.858
(21.79)
Recommended chassis cutout for solder terminal socket
PC board layout (bottom view) for PCB terminal socket