Specifications

Chapter 3: Replacing Pre-Installed Components 57
3.9.2 Optional 1+1 Redundant Power Supply
If the optional 1+1 redundant power supply is fitted, either of
the two units can be hot swapped. Follow these instructions
to replace a single power unit with a redundant power supply
unit.
Note: Before proceeding, remove the new redundant
power supply from its packaging.
1. Release thumb screws of the redundant power supply
and push the latch bar to the left. Pull both two power
modules out.
2. Remove the screws which fix the bracket to the sides of
the redundant power supply casing.