Specifications

2 Chapter 1: Overview
1.3 Features
Enclosure
• Industry 2U rack-mountable chassis
• Storage bay:
– (8) 3.5” HDD bays
– (1) slim line ODD bay
• Dimensions:
– D 26 x W 16.7 x H 3.4 inch
– D 660 x W423 x H 87 mm
Motherboard
• TYAN Thunder n3600M S2932
• Extended ATX footprint (12” x 13”)
Processors
• Dual µ PGA1207-pin ZIF L1 sockets
• Supports one or two AMD
®
Opteron™ 2000 series processors
Chipset
• nVIDIA nForce Pro 3600
• NEC nPD720400
• SMSC DME5017
• LSI 1068E
Memory
• Dual memory channels
• Total sixteen (16) 240-pin 1.8-Volt
DDRII DIMM sockets (8 on CPU1
and 8 on CPU2)
• Supports up to 64GB of registered
DDRII 667MHz
• Supports ECC type memory module
Video
•ATI
®
ES1000™ PCI graphics
controller
• 32MB DDR Frame Buffer of video
memory
BIOS
• AMI BIOS 8Mbit Flash
• Supports APM 2.0
• PnP, DMI 2.0, WfM 2.0 Power
Management
Expansion Slots
• Two (2) PCI-Express x16 slots
(each w/ x8 signal)
• Two (2) PCI-X 133/100MHz slot
• One (1) PCI-X 100MHz slot
• One (1) PCI 32-bit 33MHz, v2.3
compliant slot
• Supports a total of six (6) low profile
cards
Back I/O Ports
• One keyboard & one PS/2 mouse
ports
• Two (2) USB 2.0 ports
• One 15-pin VGA port
• One 9-pin COM port
• Two RJ45 (Marvell 88E1121 PHY +
nVIDIA MAC)
Front Panel Features
•I/O
– (2) USB 2.0 ports
• LED indicators
– Power LED
– (2) LAN LEDs
–HDD Active LED
•Switches
– Power
– Reset
Storage Controller
• SATA Controller
– Integrated six (6) SATA ports
– Serial ATA II Host controllers
embedded
– NV RAID 0, 1, 0+1, 5 and JBOD
support
• SAS Controller
– Eight (8) SAS ports
– LSI 1068E PCI-E SAS controller
– NV RAID 0, 1 and JBOD support
Storage Backplane
• One (1) 8-port SAS backplane,
supporting up to 8 SAS HDDs or
SATA HDDs
Networking
• Two 10/100/1000 Base-T LAN
(nForce Pro 3600 integrated MAC
with Marvell 88E1121 Gigabit
Ethernet PHY)
– IEEE802.3 compliant, WOL/PXE
support
– Pin header for front panel LAN
LED