Specifications

Chapter 1: Overview 15
1.5.6 S2932 Board Parts, Jumpers, and Connectors
J64 Front Panel Header
J18 IPMB Pin Header J39/J63 TYAN Front Panel 2 Connector
(for Barebone)
J17 SMDC Connector J38 LCM Pin Header (for Barebone)
J41 Front Panel USB2.0 Connector J65 SGPIO Header (for Barebone)
J8 COM Port Pin Header J66 SAS Fault LED Pin Header
(for Barebone)
HDDLED+
1  2
PWR LED+
HDDLED-
3  4
PWR LED-
Reset Switch
5  6
Power Switch
Reset Switch
7  8
Power Switch
NMI
9  10
Warning LED+
NMI
11 12
Warning LED-
5Vsb
13 14
Key
SMBus Data
15 16
GND
SMBus Clock
17 18
Chassis Intr#
JP7
- Clear CMOS Jumper
Pin 1-2 closed: Normal (Default)
Pin 2-3 closed: Clear CMOS
JP1/JP2
- PCI-X1/PCI-X2 Speed Setting
Jumper
Pin 1-2 closed: 133MHz
Pin 2-3 closed: 100MHz
JP3/JP4
- ASF2.0/SMDC Select Jumper
Pin 1-2 closed: ASF2.0 (Default)
Pin 2-3 closed: SMDC
JP5
- VGA Enable/Disable Jumper
Pin 1-2 closed: Enable (Default)
Pin 2-3 closed: Disable
JP6
- SAS Enable/Disable Jumper
Pin 1-2 closed: Enable (Default)
Pin 2-3 closed: Disable
Power Supply
The S2932 is EPS12V compatible.
 3 power connectors: EPS12V
(24-pin + 8-pin + 4-pin)
Check User’s Manual for details