Specifications

http://www.tyan.com
54
3.7.8 Hardware Health Configuration Sub-Menu
You can use this screen to view the Hardware Health Configuration Settings.
Use the up and down arrow (á/â) keys to select an item. Use the Plus and
Minus (+/-) keys to change the value of the selected option. The settings are
described on the following pages.
BIOS Setup Utility
Main Advanced PCI/PnP Boot Security Chipset Exit
Hardware Health Configuration
H/W Health Function
CPUFAN1, CPUFAN2 PWR Control
FAN3, FAN4 PWR Control
FAN Fail LED Indicator
Hardware Health Event Monitoring
[Enabled]
[Disabled]
[Disabled]
[Disabled]
4Mainboard Voltages Report
CPU1 Temperature
CPU2 Temperature
Ambient (Near SuperIO) Temp
Ambient (Near VGA) Temp
Ambient (Near MCP55) Temp
CPU1 FAN1 Speed (TACH1)
CPU2 FAN2 Speed (TACH2)
FAN3 Speed (TACH5)
FAN4 Speed (TACH6)
:xx C/ xxx F
:xx C/ xxx F
:xx C/ xxx F
:xx C/ xxx F
:xx C/ xxx F
:xxxx RPM
:xxxx RPM
:xxxx RPM
:xxxx RPM
Enables Hardware
Health Monitoring
Device.
← → Select Screen
↑↓ Select Item
+/- Change Option
Tab Select Field
F1 General Help
F10 Save and Exit
ESC Exit
Feature Option Description
Hardware Health Configuration
Enabled
H/W Health Function
Disabled
Enables Hardware Health Monitoring Device.
Enabled
CPUFAN1, CPUFAN2
PWR Control
Disabled
FAN power duty cycle is auto dynamic
programmed in selected temperature range.
Disabled: Fan Power On.
Enabled: Fan Power Duty Cycle=30%(40?C)-
100%(60?C), see max (CPU1, CPU2,
SuperIO)
Enabled
FAN3, FAN4
PWR Control
Disabled
FAN power duty cycle is auto dynamic
programmed in selected temperature range.
Disabled: Fan Power On.
Enabled: Fan Power Duty Cycle=30%(40?C)-
100%(60?C), see max (VGA, MCP55)
Enabled
FAN Fail LED
Indicator
Disabled
Enabled: Any FAN speed less than 800 RPM, the
FAN Fail LED will be lighted.