User guide

Note: When configuring the Alerts setting, please confirm that you have ENABLED Platform Event
Filter (PEF) first in the bios. On some motherboards, the BIOS will disable PEF as the default setting.
You can check it in the BIOS setup or by using UH8 to check if PEF is enabled properly.
3.4.1.1 Modify Alert
The Modify Alert page contains drop down menus and fields to configure alert types (email, SNMP
traps), event severity, destination IP/Email address, and subject etc.
Note: After finished configure Alerts setting, you also should confirm you had configure SMTP mail
server IP. Please refer to Chapter 2.4.5 for further details.