Specifications

http://www.tyan.com
21
2.4 Installing the Processor
The S8005 supported AMD
®
processors are listed in section Hardware
Specifications on page 3. Check our website at http://www.tyan.com for latest
processor support.
Note: MiTAC is not liable for damage as a result of operating an unsupported
configuration.
The diagram is provided as a visual guide to help you to install the socket
processor and may not be an exact representation of the processor you have.
Step 1: Lift the lever on the socket until it is approximately 90 or as far back as
possible to the socket.
Step 2: Align the processor with the socket. There are keyed pins underneath
the processor to ensure that the processor’s installed correctly.
Step 3: Seat the processor firmly into the socket by gently pressing down until
the processor sits flush with the socket.
Step 4: Place the socket lever back down until it locks into place. The
installation is finished.
Take care when installing the processor as it has very fragile connector pins
below the processor and can bend and break if inserted improperly.