Specifications

http://www.tyan.com
19
J31: LCM Module Header (Barebones use only)
Signal Pin Pin Signal
VCC 1 2 RXD2
KEY 3 4 GND
5VSB 5 6 TXD2
Use this header to connect the LCM module with system
monitoring function. This header is reserved for
barebones use.
CPUFAN / FAN1 / FAN2 / FAN3: 4-Pin FAN Connector
+12V
PWM Control
GND
Tachometer
1
+12V
PWM Control
GND
Tachometer
1
Use these headers to
connect the cooling fan to
your motherboard to keep
the system at optimum
performance levels.
J44 / J45 / J46 / J47: 8-Pin FAN Connector (Barebones use only)
Pin Signal
1 PWM1
2 VCC1
3 TACH1
4 GND
5 GND
6 TACH2
7 VCC2
1 9
8 PWM2
Use these headers to
connect the cooling fan
to your motherboard to
keep the system at
optimum performance
levels. These headers
are reserved for
barebones use.