Specifications

http://www.tyan.com
13
JP4: Clear CMOS Jumper
3
1
Normal
(Default)
3
1
Clear
Use this jumper when you forgot your system/setup
password or need to clear system BIOS setting.
How to clear the CMOS data
- Power off system and disconnect power supply
from AC source
- Use jumper cap to close Pin_2 and 3 for several
seconds to Clear CMOS
- Replace jumper cap to close Pin_1 and 2
Reconnect power supply to AC source
Power on system
JP13: Chassis Intrusion Header
Pin 1 2
1
Signal Intruder# GND
The Chassis Intrusion Header
provides chassis intrusion-
monitoring function.
Note: For use with chassis
that support this feature.
JP12: WDT Jumper
Open: WDT RESET System (Default)
Closed: WDT Trigger NMI
JP1: BMC Reset Jumper
Open: Normal (Default)
Closed: BMC RESET
JP2: TPM Reset Jumper
Open: Normal (Default)
Closed: TPM RESET