Specifications

http://www.tyan.com
44
3.7.2 - IDE Configuration Sub-Menu
You can use this screen to select options for the IDE Configuration Settings.
Use the up and down <Arrow> Keys to select an item. Use the <Plus> and
<Minus> Keys to change the value of the selection options.
Feature Option Description
IDE Configuration
Enhanced
Disabled
SATA Configuration
Compatible
Configure SATA devices
IDE
RAID
Configure SATA as
AHCI
Select legacy IDE, RAID or AHCI as the
SATA interface.
Disabled
Hard Disk Write
Protect
Enabled
Enable/Disable device write protection.
This will be effective only if device is
accessed through BIOS.
IDE Detect Time
Out (Sec)
0~35
(at 5 interval)
Select the time out value for detecting
ATA/ATAPI device(s).
BIOS Setup Utility
Advanced
IDE Configuration
SATA Configuration
Configure SATA as
Primary IDE Master
Secondary IDE Master
Third IDE Master
Third IDE Slave
Fourth IDE Master
Fourth IDE Slave
Hard Disk Write Protect
IDE Detect Time Out (Sec)
[Enhanced]
[IDE]
[Not Detected]
[Not Detected]
[Not Detected]
[Not Detected]
[Not Detected]
[Not Detected]
[Disabled]
[35]
Options
Disabled
Compatible
Enhanced
← → Select Screen
↑↓ Select Item
+/- Change Option
F1 General Help
F10 Save and Exit
ESC Exit