Specifications

http://www.tyan.com
21
J167: SSI Fan Connector
Signal Pin Pin Signal
FANIN4
1 2
FANIN8
FANIN5
3 4
FANIN1
FANIN6
5 6
FANIN3
FANIN2
7 8
FANIN9
FANIN7
9 10
FANIN10
GND
11 12
CUT
FANCTL5
13 14
FANCTL4
FANIN11
15 16
FANIN13
FANIN12
17 18
FANIN14
Pin_1 2
19 20
NC
19 20
FAN_BP_PWM3
J168: SPDIF Header
Pin 1 2
Signal
SPDIF GND
J169: CD_IN
Pin 1 2 3 4
Pin_1
Signal
CD_L GND GND CD_R
JP1: Clear CMOS
Pin_3 Pin_1
Normal
(Default)
Pin_3 Pin_1
Clear CMOS
You can reset the CMOS settings by using this
jumper if you have forgotten your system/setup
password or need to clear system BIOS setting.
- Power off system and disconnect both
power connectors from the
motherboard
- Put jumper cap back to Pin_1 and Pin_2
(default setting)
- Use jumper cap to close Pin_2 and Pin_3
for several seconds to Clear CMOS
Reconnect power & power on system
Onboard ID LED
You can identify the specific system using this LED. It is convenient for you to
active ID LED through IPMI from remote site.
Pin Signal
+ P3V3_AUX
- ID_SW_L
State Color Description
On Blue System identified
+ -
Off Off System not identified