Specifications

23
http://www.tyan.com
JP1: Clear CMOS Jumper
3
1
Normal
(Default)
3
1
Clear
Use this jumper when you forgot your system/setup
password or need to clear system BIOS setting.
How to clear the CMOS data
- Power off system and disconnect power
supply from AC source
- Use jumper cap to close Pin_2 and 3 for
several seconds to Clear CMOS
- Replace jumper cap to close Pin_1 and 2
Reconnect power supply to AC source
Power on system
JP2/JP3: COM2 Switch Jumper
3
1
Pin 1-2 Closed: SIO to COM2 (Default)
3
1
Pin 2-3 Closed: BMC UART2 to COM2
JP4: PCIX Frequency Select Jumper
3
1
Pin 1-2 Closed: PCIX 133MHz (Default)
1
3
Pin 2-3 Closed: PCIX 100MHz
J13: BMC Reset Jumper
1
NC: (Default)
1
Pin 1-2 Closed: Disable BMC
J34: SAS Enable/Disable Jumper (for S7020WAGM2NR only)
3
1
Pin 1-2 Closed: Enable (Default)
1
3
Pin 2-3 Closed: Disable