Specifications

http://www.TYAN.com
54
3.7.3 - Super I/O Configuration Sub- Menu
You can use this screen to select options for the Super I/O settings. Use the
up and down arrow ( / ) keys to select an item. Use the Plus and Minus
(+/-) keys to change the value of the selected option.
Feature Option Description
IDE Configuration
Disabled
Compatible
SATA
Configuration
Enhanced
Configure SATA devices
IDE
RAID
Configure SATA
as
AHCI
Select legacy IDE, RAID or AHCI as
the SATA interface.
Disabled
Hard Disk Write
Protect
Enabled
Enable/Disable device write
protection. This will be effective only
if device is accessed through BIOS.
IDE Detect Time
Out (Sec)
0~35
(at 5 interval)
Select the time out value for
detecting ATA/ATAPI device(s).
BIOS Setup Utility
Main Advanced PCI/PnP Boot Security Chipset Exit
Configure Win627DHG Super IO Chipset
Serial Port1 Address
Serial Port2 Address
Watchdog Mode
Chassis intrusion detection
[3F8/IRQ4]
[2F8/IRQ3]
[Disabled]
[Disabled]
Allows BIOS to Select
Serial Port1 Base
Addresses.
← → Select Screen
↑↓ Select Item
+/- Change Option
F1 General Help
F10 Save and Exit
ESC Exit