Datasheet

http://www.tyan.com

The following pictures illustrate how to connect an SATA drive

1. SATA drive cable

connection

2. SATA drive power

connection

3. SATA cable motherboard

connector

4. SATA drive power adapter

2.8 - Installing Add-In Cards

Before installing add-in cards, it’s helpful to know if they are fully compatible with

your motherboard. For this reason, we’ve provided the diagrams below, showing

the slots that appear on your motherboard.

PCI-E x16 slot (w/ x8 bus)

NOTE: If a PCI-E x16 VGA adapter is inserted into this slot, the VGA card will only work at

PCI-E x1 speed; this is a chipset limitation.

PCI-X 1.0 64/133 slot

32/33 PCI 2.3 slot

NOTE

YOU MUST ALWAYS unplug the power connector from the

motherboard before performing system hardware changes.

Otherwise you may damage the board and/or expansion

device.

Simply find the appropriate slot for your add-in card and insert the card firmly.

Do not force any add-in cards into any slots if they do not seat in place. It is

better to try another slot or return the faulty card rather than damaging both the

motherboard and the add-in card.