User`s manual

Volume Creation
ver7.0 / User's Manual 49
13. Select Finish to create the RAID volume.
9.2 Recovery Volume Creation
A recovery volume can be created using either Basic mode or Advanced mode in the
Intel® Matrix Storage Console.
9.2.1 Recovery Volume Creation in Basic Mode
Warning: Creating a recovery volume will permanently delete any existing data on the drive
selected as the recovery drive. Back up all important data before beginning these steps.
Note: This option may or may not be available depending on your system configuration. If
you do not see the option listed, refer to Recovery Volume Creation in Advanced
Mode.
To create a recovery volume in Basic mode, use the following steps:
1. Open the Intel® Matrix Storage Console. (Start >> All Programs >> Intel® Matrix
Storage Manager >> Intel® Matrix Storage Console)