TYAN S1572 ATX Pentium Class 75 thru 200MHz 430TX PCI-ISA System Board User's Manual

33S1572-001-01 http://www.tyan.com
4.9 Integrated Peripherals
Integrated Peripherals
Award Software, Inc.
IDE HDD Block Mode :Enabled
IDE Primary Master PIO :Auto
IDE Primary Slave PIO :Auto
IDE Secondary Master PIO :Auto
IDE Secondary Slave PIO :Auto
IDE Primary Master UDMA :Auto
IDE Primary Slave UDMA :Auto
IDE Secondary Master UDMA :Auto
IDE Secondary Slave UDMA :Auto
On-Chip Primary PCI-IDE :Enable
On-Chip Secondary PCI-IDE :Enable
USB Keyboard Support :Disable
USB Latency Time (PCI CLK):32
On-Board FDC Controller :Enable
On-Board UART 1 :Com1/3F8
On-Board UART 2 :Com2/2F8
On-Board UART 2 :Standard
On-Board Parallel Port :378/IRQ7
Parallel Port Mode :Normal
The Settings in the Integrated Peripherals section lets the user enable or
disable on-board devices. You can also configure the I/O and IRQ
settings of the on-board serial and parallel ports.