Transport GS10 B2094T15 Product Manual

http://www.TYAN.com

4.2 Jumper Settings

Jumpers provide a way to reconfigure the circuitry on the system board for specific needs. When

you change the CPU or want to reset the BIOS configuration, you need to change the jumper

settings.

See the next figure for jumper locations and the table that follow for jumper definitions.

CAUTION: Jumpers not described in this section are reserv ed for factory use only. Do not

change the default settings.

Jumper Definition Setting Description

1-2 Normal (default) CCMOS1 CMOS setting

2-3 Clear CMOS

To clear the RTC and CMOS RAM, set CCMOS1 to

2-3 for one second and set it back to 1-2 again.

1-2 Auto-detect (default)

2-3 100 MHz

JP1 CPU bus

frequency

setting

None 133 MHz