User's Manual

http://www.tyan.com

Chapter 3

BIOS Configuration

* Setting option not selectable.

ACPI Aware O/S

Set this option to Yes to enable Advanced Configuration and Power Interface

(ACPI) BIOS for an ACPI-aware operating system.

Power Management/APM

Set this option to Enabled to enable the chipset power management and APM

(Advanced Power Management) features. The settings are Enabled or Dis-

abled.

Power Button Function

This option specifies how the power button mounted externally on the

computer chassis is used. See Soft Power Connector on page 20 for more

information. The settings are shown in the table below.

Green PC Monitor Power State

This option specifies the power state that the green PC-compliant video

Setting Option Optimal Default Fail-Safe Default

Device 6 (Serial port 1) M onitor M onitor

Device 7 (Serial port 2) M onitor M onitor

Device 8 (Parallel port) M onitor M onitor

Device 5 (Floppy disk) M onito r Mo nitor

Device 0 (Primary master IDE) M onitor M onitor

Device 1 (Primary slave IDE) Monitor M onitor

Device 2 (Secondary master IDE) M onitor M onito r

Device 3 (Secondary slave IDE) M onito r Mo nitor

LAN Wake-up Fo r Addon LAN Disabled Disabled

LAN Wake-up Fo r Onbo ard LAN Disabled Disabled

PC 98 Power LED Enabled Enabled

Fan OFF at Suspend Enabled Enabled

RTC Wake-up Disabled Disabled

*Ho ur N/A N/A

*M inute N/A N/A

gnitteSnoitpircseD

ffO/nO.fforonoretupmocehtsnrutnottubrewopehtgnihsuP

dnepsuS .edomrewopnOlluFroedomdnepsuSniretupmocehtsecalpnottubrewopehtgnihsuP