Product Manual

10
TWTG R&D B.V. 2019 V1.5
Installation without adhesive
The Temperature Sensor may be placed without adhesive when:
• The device is mounted behind insulation
• The mounting surface is sufficiently magnetic
Necessities
• Sandpaper / Putty Knife
• Cleaning Supplies
• Temperature Sensor
• Magnet Key (P18-023-M_KEY)
Sequence
1. If the surface is not smooth remove any irregularities using a putty knife or sandpaper
2. Clean the surface - make sure dirt and grease is removed
3. Turn on the Temperature Sensor (see chapter “User Interface”)
4. Mount the Temperature Sensor using the internal magnets
Continue on next page.
Internal Magnets (2x)
Fig. 13: Internal Magnets