Product Manual

9
TWTG R&D B.V. 2019 V1.5
General notes for installation
1. For accurate temperature reading both the sensor and the object it is installed on need to be insulated.
2. The sensor measures the temperature of the outside surface it is installed on. The relation to the inside
temperature is installation and content dependent.
Installation options
Installation is divided in two options:
1. Installation without adhesive
2. Installation with adhesive
Temperature Probe notes
The Temperature Probe must always be in contact with the surface it is installed on.
The contact surface should be as big as possible. If the surface is very rough the contact surface will be smaller.
Dirt and other irregularities will also affect the performance and must be removed.
For optimal thermal performance:
• the probe should always be in contact with the surface it is installed on
• the surface should be clean
• the surface should be smooth
• the surface should be free from any irregularities
Probe Contact Surface
Temperature Probe
Probe Section View
Fig. 12: Temperature Probe