User Manual

2017/11/10 22:17 45/52 Torpedo Studio User's Manual
User's manuals - http://wiki.two-notes.com/
If you have several products communicating with a MIDI connection, you can use the “MIDI
OUT/THRU” output of the Torpedo Studio, which mirrors every MIDI message coming in through the
“MIDI IN” input.
6.1 Program Change (PC)
Every preset in the Torpedo Studio is identified by a corresponding program number. Preset 1 of the
Torpedo Studio corresponds to the MIDI PC 1. You can address the 100 presets (from 1 to 100, le PC
100 appelant le preset 00). So you can access every preset by sending a Program Change message
with the appropriate number.
6.2 Control Change (CC)
The following table indicates the Control Change numbers for every parameter, as well as their range
and behavior.
Parameter
CC#
Range Behavior
Ch A Ch B
Simulation mode
Simulation bypass
0
0-1 0 = Off(Bypass) ; 1 = On
Power Amp
On/Off 1 64 0-1 0 = Off ; 1 = On
Model 2 65 0-7 0 = Model #0 ; 1 = Model #1…
Volume 3 66 0-30 0 = 0dB ; 30 = 30dB
Presence 4 67 0-127 0 = 0% ; 63 = 50% ; 127 = 100%
Depth 5 68 0-127 0 = 0% ; 63 = 50% ; 127 = 100%
Character 6 69 0-1 0 = Triode : 1 = Pentode
Miking
Mode 7 70 0-3 0 = Off ; 1 = Cab ; 2 = User (Ch B : 3 = Link)
Speaker 8 71 0-x 0 = Cab #0 ; 1 = Cab #1…
User 9 72 0-x 0 = File #0 ; 1 = File #1…
Mic 10 73 0-7 0 = Mic #1 ; 1 = Mic #1…
Distance 11 74 0-127 0 = 0% ; 63 = 50% ; 127 = 100%
Center 12 75 0-127 0 = 0% ; 63 = 50% ; 127 = 100%
Position 13 76 0-1 0 = Back : 1 = Front
Variphi 14 77 0-127 0 = 0% ; 63 = 50% ; 127 = 100%
Overload 15 78 0-127 0 = 0% ; 63 = 50% ; 127 = 100%
Dry/Wet 16 79 0-127 0 = 0% ; 63 = 50% ; 127 = 100%
Post-FX
Post-FX bypass 17 0-1 0 = Off(Bypass) ; 1 = On
EQ
Low Gain 18 81 0-40 0 = -20dB ; 20 = 0dB ; 40 = 20dB
Low Freq 19 82 0-127 Specifi mapping to Hz
Mode 20 83 0-3 0 = Off ; 1 = Guitar : 2 = Bass ; 4 = Link (Ch B : 3 = Link)